Stair Calculator: Stringers
Mirage Interactive Ltd Tools
Stair calculator app: rise, run, stringer cuts and 1:1 marks. Offline.
- Price
- $7.99
- No in-app purchases
- Updated
- Nov 17
- 2026 · v1.0.4
Screenshots
About Stair Calculator: Stringers
Stair calculator for stringer layout: type the total rise and tread run in fractions or metric (7 3/4 in or 197 mm), read the riser count, rise, run and stringer cut marks. Offline, no ads, no subscription, one price.
Get unit rise, unit run, cut angles and a cut list for every riser. Print 1:1 step templates and framing-square marks. No account needed.
WHAT YOU CAN WORK OUT
This stair calculator works out rise and run for deck stairs and house stairs, and doubles as a stair stringer calculator for the framing square. From the measured rise, the number of risers and the tread run you get the unit rise and unit run, the total run, the slope angle and the usual rise-plus-run figures, for a stair that ends on the upper floor or on its own top tread.
THE STRINGER
The cut line length, the plumb and level cut angles (from the board edge and from the framing square), the notch depth, the shorter first riser cut and a cut list of every riser cut. Add the board depth you use and the remaining throat is shown as a number.
1:1 MARKS TO PRINT
Print the step template and the framing-square marks at exactly full size. Each page carries a 100 mm and 4 in scale bar so you can check the print with a rule before you cut. A stringer job sheet, scaled to the page, goes with them.
TYPE IT HOW YOU SAY IT
Type 7 3/4 in, 8' 11" or 2718 mm, in feet, inches and fractions, or in mm, cm and m. Each field shows how your entry was read, and a plus or minus sign tells you when a shown figure is rounded.
SAVE, BACK UP, PRINT
Save jobs by name, reopen, rename or duplicate them and keep a backup file. Light, dark and high-contrast themes, twelve languages and built-in help.
THE MODEL IS STATED
Plumb cuts sit at the riser faces and the seats lie one tread thickness below the tread surface. Risers and nosings are not modelled. With the top on the upper floor, treads are risers minus one. The steps in between are shown, not hidden.
WHAT IT DOES NOT DO
It gives rise, run, lengths and cut angles only. It does not check building code, rise or run limits, guards, handrails, headroom, landings, loads or spans, and it does not say a stair is safe. Your inspector decides. Try the marks on a scrap board before you cut the stringer.
PRIVATE AND SIMPLE
Works fully offline. No ads. No account. No subscription. No data collected. Your jobs stay on your device. Paid once, with no in-app purchases.
Questions, problems or ideas? Tap Feedback & support in the app or email [email protected]. We answer every message.
Made by Mirage Interactive.
Get unit rise, unit run, cut angles and a cut list for every riser. Print 1:1 step templates and framing-square marks. No account needed.
WHAT YOU CAN WORK OUT
This stair calculator works out rise and run for deck stairs and house stairs, and doubles as a stair stringer calculator for the framing square. From the measured rise, the number of risers and the tread run you get the unit rise and unit run, the total run, the slope angle and the usual rise-plus-run figures, for a stair that ends on the upper floor or on its own top tread.
THE STRINGER
The cut line length, the plumb and level cut angles (from the board edge and from the framing square), the notch depth, the shorter first riser cut and a cut list of every riser cut. Add the board depth you use and the remaining throat is shown as a number.
1:1 MARKS TO PRINT
Print the step template and the framing-square marks at exactly full size. Each page carries a 100 mm and 4 in scale bar so you can check the print with a rule before you cut. A stringer job sheet, scaled to the page, goes with them.
TYPE IT HOW YOU SAY IT
Type 7 3/4 in, 8' 11" or 2718 mm, in feet, inches and fractions, or in mm, cm and m. Each field shows how your entry was read, and a plus or minus sign tells you when a shown figure is rounded.
SAVE, BACK UP, PRINT
Save jobs by name, reopen, rename or duplicate them and keep a backup file. Light, dark and high-contrast themes, twelve languages and built-in help.
THE MODEL IS STATED
Plumb cuts sit at the riser faces and the seats lie one tread thickness below the tread surface. Risers and nosings are not modelled. With the top on the upper floor, treads are risers minus one. The steps in between are shown, not hidden.
WHAT IT DOES NOT DO
It gives rise, run, lengths and cut angles only. It does not check building code, rise or run limits, guards, handrails, headroom, landings, loads or spans, and it does not say a stair is safe. Your inspector decides. Try the marks on a scrap board before you cut the stringer.
PRIVATE AND SIMPLE
Works fully offline. No ads. No account. No subscription. No data collected. Your jobs stay on your device. Paid once, with no in-app purchases.
Questions, problems or ideas? Tap Feedback & support in the app or email [email protected]. We answer every message.
Made by Mirage Interactive.
What’s new
Version 1.0.4 · Updated November 17, 2026
New: if something goes wrong, the app keeps a short error report on this device only. Open Feedback & support to read, copy or delete it, or add it to a "Report a problem" email. Nothing is sent unless you send the email yourself. Fix: dialogs now scroll at large text sizes, and the support address fits on one line.
Alternatives to Stair Calculator: Stringers
Looking for apps like Stair Calculator: Stringers? Here are 6 similar Android apps on Google Play.
-
SizeMyDuct: Duct Calculator
-
Sun Position & Shadow Length
-
Nautical Navigation Calculator
-
Density Altitude E6B Computer
-
Cutting Speed, Tap Drill, Sine
-
Pipe Offset Layout Calculator
| App | Rating | Price | Compare |
|---|---|---|---|
| Stair Calculator: Stringers | – | $7.99 | |
| SizeMyDuct: Duct Calculator | – | 5.99 USD | Compare |
| Sun Position & Shadow Length | – | 11.99 USD | Compare |
| Nautical Navigation Calculator | – | 9.99 USD | Compare |
| Density Altitude E6B Computer | – | 14.99 USD | Compare |
| Cutting Speed, Tap Drill, Sine | – | 14.99 USD | Compare |
| Pipe Offset Layout Calculator | – | 5.99 USD | Compare |
Similar apps on Google Play
- SizeMyDuct: Duct Calculator
- Sun Position & Shadow Length
- Nautical Navigation Calculator
- Density Altitude E6B Computer
- Cutting Speed, Tap Drill, Sine
- Pipe Offset Layout Calculator
- Roof Framing Calculator & Cuts
- Conduit Bending & Offset Marks
- Miter Angle & Brace Calculator
- WearKeeper: Watch Collection