AppPage.net

Screenshots

  • Cutting Speed, Tap Drill, Sine screenshot 1
  • Cutting Speed, Tap Drill, Sine screenshot 2
  • Cutting Speed, Tap Drill, Sine screenshot 3
  • Cutting Speed, Tap Drill, Sine screenshot 4
  • Cutting Speed, Tap Drill, Sine screenshot 5
  • Cutting Speed, Tap Drill, Sine screenshot 6
  • Cutting Speed, Tap Drill, Sine screenshot 7
  • Cutting Speed, Tap Drill, Sine screenshot 8

About Cutting Speed, Tap Drill, Sine

Tap drill size chart (metric and inch) and cutting speed calculator for the machinist, offline, no ads, no subscription, one price: spindle RPM and feed, and the tap drill for M8x1.25 or 5/16-18 from a drill maker's table, with the source shown. Also bolt circle coordinates and a 1:1 printable drilling template. Plus shop geometry: sine bar, taper, thread wires, dovetail, chord and radius, triangles. Offline, no ads, no subscription, no account.

SPEED AND FEED
Feeds and speeds for the job in hand: spindle RPM from cutting speed and diameter, feed rate from chip load and number of teeth, tapping feed and metal removal rate, in metric or inch. The formula and every step in between are shown, so you can follow the arithmetic.

TAP DRILL CHART
Pick a thread such as M8x1.25 or 5/16-18 and get the tap drill from a drill maker's published table, with the source shown, next to the drill from the thread formula and the nearest drills below and above with their thread percentage. For M8x1.25, where two charts disagree, both answers are shown. Inch #0 to 1-1/8 and metric M1.6 to M27.

DRILL SIZES
Number, letter, fractional and metric drills with their decimal sizes. Look up a drill by name or find the nearest drill to a decimal.

BOLT CIRCLE AND HOLE PATTERNS
X and Y coordinates for holes on a bolt circle, in a row or on a grid, from the centre or from a corner. Set the number of holes, the start angle and the direction. Signed angles and offsets, ready for your DRO or program.

SHOP GEOMETRY
Six shop-floor geometry tools beside the calculators: sine bar with an 81-piece gauge block stack, taper, thread wires (3-wire measurement and best wire size), dovetail over pins, chord, sagitta and radius, and a triangle solver for right and oblique triangles. Inch or mm, answer first, to-scale sketches, saved jobs and a printable result sheet.

1:1 DRILLING TEMPLATE
Print the hole layout at exactly full size on A4 or Letter and centre punch through it. Every page carries a 100 mm and a 4 in scale bar and a 20 mm calibration square, so you can check the print with a rule before you mark metal. A result sheet, scaled to the page, goes with it.

YOUR TOOLS AND SAVED JOBS
Keep your own cutters, taps and materials with the values you use. The app ships no material library: you enter your cutting speed and chip load. Save jobs by name, reopen, rename or duplicate them and keep a backup file. Type 3 1/2 in or 88.9 mm, whichever you say at the machine.

THE MODEL IS STATED
Each result lists its formula and rounding. The tap drill table percentages are those of the nominal thread; the maker's own percentage is on the oversize hole and is labelled as such. Displayed numbers are rounded and the app says so.

WHAT IT DOES NOT DO
It gives starting values and geometry only. It does not know your machine, tool, material, coolant or setup, and it does not say that a cutting value or a hole position is safe or within tolerance. The machinist decides: check the tool maker's recommendation and try the template on scrap first.

PRIVATE AND SIMPLE
Works fully offline. No ads. No account. No subscription. No data collected. Your jobs stay on your device. Paid once, with no in-app purchases. For Android phones and tablets, and also on Windows.

Questions, or a number that looks wrong? Use Help > Send feedback or Report a problem in the app. You can read and edit the email before it is sent.

Questions, problems or ideas? Tap Feedback & support in the app or email [email protected]. We answer every message.

Made by Mirage Interactive.

What’s new

Version 1.1.2 · Updated November 17, 2026

New: if something goes wrong, the app keeps a short error report on your device. The app never sends it: under Feedback & support you can read, copy or delete it, and if there is a report, "Report a problem" adds its newest entry to your email. Fixed: with large text sizes, you can now scroll the content of every dialog to read all of its text.