Miter Angle & Brace Calculator
Mirage Interactive Ltd Tools
Miter angle calculator app and crown molding angle calculator. Offline, no ads.
- Price
- $2.99
- No in-app purchases
- Updated
- Nov 17
- 2026 · v1.0.3
Screenshots
About Miter Angle & Brace Calculator
Miter angle calculator app for picture frames and gate braces, and a crown molding angle calculator: type your measurements, check the diagram, read the saw settings and brace angles.
The crown molding angle calculator gives the miter and bevel settings for cutting molding flat, based on its spring angle. Save the job and export a cut card. Works offline, no ads, no account, paid once.
BRACE
Enter the width and height of a rectangle, such as a gate, frame or shelf. You get the corner-to-corner span (P1 to P3) and the angle from horizontal and from vertical. Choose whether you measured the inside of the opening, the outside edges or the center lines. Width and height are marked on a live diagram.
FRAME
Choose the number of sides, or enter the corner angle. You get the saw miter setting and the angle on the piece, for picture frames and polygons with equal sides. A warning appears when the setting is beyond what many miter saws can reach.
CROWN
Compound miter and bevel settings for crown molding cut flat on the saw table (the flat method). Pick the spring angle (52/38 or 45/45, or enter your own), the inside or outside corner, and the corner angle between the walls. Test on scrap first: the app does not say whether a cut goes left or right, so check your saw's crown chart.
TYPE IT YOUR WAY
Type lengths the way you say them: 30 3/8", 2' 6 3/8", 2ft 6in or 771.5 mm. Fractions, feet and inches, or metric. Results show in inches and fractions by default. Each field shows how your entry was read, and a clear message explains anything it cannot read.
SAVE AND SHARE
Save projects with a name, find your recent calculations, duplicate or rename them, and export or import a backup. Export a cut card as a PDF to print or share. Light, dark and high-contrast themes, and a built-in help section.
WHAT IT DOES AND DOES NOT DO
It calculates the span and angles of a rectangular brace, miter angles for equal-sided frames, and flat-method miter and bevel settings for crown molding. The brace span is the distance between two corners, not the cut length of a board, which depends on the board width and how it is fitted. It does not handle sloped or vaulted ceilings, and it does not give left or right saw directions. It is a calculator and not a substitute for checking measurements: test on scrap before cutting good material.
PRIVATE AND SIMPLE
Works fully offline. No ads. No account. No data collected. Your projects stay on your device. Paid once, with no subscription and no in-app purchases.
Questions or a calculation that looks wrong? Use Help > Send feedback or Report a calculation problem in the app. You can read and edit the email before it is sent.
Questions, problems or ideas? Tap Feedback & support in the app or email [email protected]. We answer every message.
Made by Mirage Interactive.
The crown molding angle calculator gives the miter and bevel settings for cutting molding flat, based on its spring angle. Save the job and export a cut card. Works offline, no ads, no account, paid once.
BRACE
Enter the width and height of a rectangle, such as a gate, frame or shelf. You get the corner-to-corner span (P1 to P3) and the angle from horizontal and from vertical. Choose whether you measured the inside of the opening, the outside edges or the center lines. Width and height are marked on a live diagram.
FRAME
Choose the number of sides, or enter the corner angle. You get the saw miter setting and the angle on the piece, for picture frames and polygons with equal sides. A warning appears when the setting is beyond what many miter saws can reach.
CROWN
Compound miter and bevel settings for crown molding cut flat on the saw table (the flat method). Pick the spring angle (52/38 or 45/45, or enter your own), the inside or outside corner, and the corner angle between the walls. Test on scrap first: the app does not say whether a cut goes left or right, so check your saw's crown chart.
TYPE IT YOUR WAY
Type lengths the way you say them: 30 3/8", 2' 6 3/8", 2ft 6in or 771.5 mm. Fractions, feet and inches, or metric. Results show in inches and fractions by default. Each field shows how your entry was read, and a clear message explains anything it cannot read.
SAVE AND SHARE
Save projects with a name, find your recent calculations, duplicate or rename them, and export or import a backup. Export a cut card as a PDF to print or share. Light, dark and high-contrast themes, and a built-in help section.
WHAT IT DOES AND DOES NOT DO
It calculates the span and angles of a rectangular brace, miter angles for equal-sided frames, and flat-method miter and bevel settings for crown molding. The brace span is the distance between two corners, not the cut length of a board, which depends on the board width and how it is fitted. It does not handle sloped or vaulted ceilings, and it does not give left or right saw directions. It is a calculator and not a substitute for checking measurements: test on scrap before cutting good material.
PRIVATE AND SIMPLE
Works fully offline. No ads. No account. No data collected. Your projects stay on your device. Paid once, with no subscription and no in-app purchases.
Questions or a calculation that looks wrong? Use Help > Send feedback or Report a calculation problem in the app. You can read and edit the email before it is sent.
Questions, problems or ideas? Tap Feedback & support in the app or email [email protected]. We answer every message.
Made by Mirage Interactive.
What’s new
Version 1.0.3 · Updated November 17, 2026
New: if something goes wrong, the app keeps a short error report on your device. The app never sends it: under Feedback & support you can read, copy or delete it, and if there is a report, "Report a calculation problem" adds its newest entry to your email. Fixed: with large text sizes, you can now scroll the content of every dialog to read all of its text.