Platterwise: Turntable Speed
Fernhart Labs Music & Audio In-app purchases Contains ads
Turntable speed test, wow & flutter meter, alignment protractors, strobe discs.
- Downloads
- 8+
- on Google Play
- Price
- Free
- In-app purchases
- Updated
- Nov 12
- 2026 · v1.2.1
Screenshots
Save to PinterestAbout Platterwise: Turntable Speed
Platterwise is a turntable speed test, wow and flutter meter and alignment tool that tells you how far each reading can be trusted.
Most phone speed apps read the gyroscope, and a gyroscope's scale can be a percent off. That's why two phones on one platter give two answers. Platterwise times whole laps with the compass, which has no scale to be wrong, so the speed you see doesn't depend on which phone you own. It works on phones with no gyroscope too.
SPEED, THREE WAYS
• Phone on the platter: no test record needed. 33⅓, 45 and 78 rpm, with a ± on every reading. It keeps running while you adjust the pitch, and buzzes when it has enough turns.
• Test-tone record: speed from a 3150, 3000 or 1000 Hz track through the microphone.
• Strobe disc: print a disc for 50 or 60 Hz lighting, with rings for dead on and ±0.5, 1 and 2%. Count the drift and it turns that into a figure.
WOW AND FLUTTER
• DIN-style 4 Hz weighted peak, weighted RMS, wow and flutter bands, drift and a speed trace.
• The strongest rates listed, so you can see what is wobbling.
• An off-centre record hole is usually the biggest wobble on a test track. Platterwise reports it apart, and shows the weighted figure with it taken out.
ALIGNMENT
• Baerwald, Löfgren B and Stevenson for IEC, DIN, JIS or your own groove limits.
• Null points, overhang, offset angle and tracking error, with curves to compare.
• Printable arc and two-point protractors drawn for your arm, on A4 or Letter.
• Your printer got the size wrong? Enter what the 100 mm bars measured and the next PDF cancels it, even if it scales each way differently.
• Check an arm as it stands from its maker's figures.
CARTRIDGE AND SETUP
• Arm and cartridge resonance, with the arm mass your cartridge wants.
• Phono loading for moving magnet, and step-up transformers for moving coil.
• A bubble level that takes out your phone's own error, and platter tilt with no calibration.
• Hum and rumble check: a before-and-after comparison.
TAPE DECKS TOO
• Cassette and reel-to-reel: speed, drift and DIN-style weighted wow and flutter from a 3150 or 3000 Hz test tape, at 1⅞, 3¾, 7½ or 15 ips.
• Every steady wobble up to 60 Hz is listed, so a capstan or pinch roller shows up by its rate.
• Measure at the start, middle and end of a side to see speed change as the reels fill.
• Watch the live reading while you turn a speed trimmer.
• Flags a 3150 Hz tone that is really a 3000 Hz tape, which would read as 5% off.
A LOG FOR EACH DECK
• Turntables and tape decks. Stylus hours, setup notes and every reading, with speed over time.
• See what a new belt changed. Share a PDF or CSV. Back up to a file.
STRAIGHT ANSWERS
A phone is a good guide, not a calibrated instrument. Platterwise says when a compass reading can't be used, when a tone is too noisy to trust, and when a run failed its own checks, and it shows you why instead of guessing. Test-tone readings are against the record or tape you used. The tape mode has been checked on simulated tapes only, not yet on a real deck.
Your decks and readings stay on your phone, with no account. The microphone is used only during a tone or hum check, and sound is never recorded to a file. Ads show on the main lists, never while you measure, and an optional one-time purchase removes them.
Most phone speed apps read the gyroscope, and a gyroscope's scale can be a percent off. That's why two phones on one platter give two answers. Platterwise times whole laps with the compass, which has no scale to be wrong, so the speed you see doesn't depend on which phone you own. It works on phones with no gyroscope too.
SPEED, THREE WAYS
• Phone on the platter: no test record needed. 33⅓, 45 and 78 rpm, with a ± on every reading. It keeps running while you adjust the pitch, and buzzes when it has enough turns.
• Test-tone record: speed from a 3150, 3000 or 1000 Hz track through the microphone.
• Strobe disc: print a disc for 50 or 60 Hz lighting, with rings for dead on and ±0.5, 1 and 2%. Count the drift and it turns that into a figure.
WOW AND FLUTTER
• DIN-style 4 Hz weighted peak, weighted RMS, wow and flutter bands, drift and a speed trace.
• The strongest rates listed, so you can see what is wobbling.
• An off-centre record hole is usually the biggest wobble on a test track. Platterwise reports it apart, and shows the weighted figure with it taken out.
ALIGNMENT
• Baerwald, Löfgren B and Stevenson for IEC, DIN, JIS or your own groove limits.
• Null points, overhang, offset angle and tracking error, with curves to compare.
• Printable arc and two-point protractors drawn for your arm, on A4 or Letter.
• Your printer got the size wrong? Enter what the 100 mm bars measured and the next PDF cancels it, even if it scales each way differently.
• Check an arm as it stands from its maker's figures.
CARTRIDGE AND SETUP
• Arm and cartridge resonance, with the arm mass your cartridge wants.
• Phono loading for moving magnet, and step-up transformers for moving coil.
• A bubble level that takes out your phone's own error, and platter tilt with no calibration.
• Hum and rumble check: a before-and-after comparison.
TAPE DECKS TOO
• Cassette and reel-to-reel: speed, drift and DIN-style weighted wow and flutter from a 3150 or 3000 Hz test tape, at 1⅞, 3¾, 7½ or 15 ips.
• Every steady wobble up to 60 Hz is listed, so a capstan or pinch roller shows up by its rate.
• Measure at the start, middle and end of a side to see speed change as the reels fill.
• Watch the live reading while you turn a speed trimmer.
• Flags a 3150 Hz tone that is really a 3000 Hz tape, which would read as 5% off.
A LOG FOR EACH DECK
• Turntables and tape decks. Stylus hours, setup notes and every reading, with speed over time.
• See what a new belt changed. Share a PDF or CSV. Back up to a file.
STRAIGHT ANSWERS
A phone is a good guide, not a calibrated instrument. Platterwise says when a compass reading can't be used, when a tone is too noisy to trust, and when a run failed its own checks, and it shows you why instead of guessing. Test-tone readings are against the record or tape you used. The tape mode has been checked on simulated tapes only, not yet on a real deck.
Your decks and readings stay on your phone, with no account. The microphone is used only during a tone or hum check, and sound is never recorded to a file. Ads show on the main lists, never while you measure, and an optional one-time purchase removes them.
Alternatives to Platterwise: Turntable Speed
Looking for apps like Platterwise: Turntable Speed? Here are 6 similar Android apps on Google Play. All of them are free to download.
-
Treewright: Family Tree Chart
-
Spotwright: Dance Formations
-
Clefwright: Sheet Music Maker
-
Spindlewise: CNC Simulator
-
Facetwise: STL & 3D Viewer
-
Tilthwise: Garden Planner
| App | Rating | Price | Installs | Last updated | Compare |
|---|---|---|---|---|---|
| Platterwise: Turntable Speed | – | Free | 5+ | Nov 12, 2026 | |
| Treewright: Family Tree Chart | – | Free | 0+ | Nov 20, 2026 | Compare |
| Spotwright: Dance Formations | – | Free | 0+ | Nov 19, 2026 | Compare |
| Clefwright: Sheet Music Maker | – | Free | 0+ | Nov 20, 2026 | Compare |
| Spindlewise: CNC Simulator | – | Free | 0+ | Nov 19, 2026 | Compare |
| Facetwise: STL & 3D Viewer | – | Free | 0+ | Nov 17, 2026 | Compare |
| Tilthwise: Garden Planner | – | Free | 0+ | Nov 16, 2026 | Compare |
Similar apps on Google Play
- Treewright: Family Tree Chart
- Spotwright: Dance Formations
- Clefwright: Sheet Music Maker
- Spindlewise: CNC Simulator
- Facetwise: STL & 3D Viewer
- Tilthwise: Garden Planner
- Poolsmith: Pool & Spa Care
- Velowise: Pitch Speed Radar
- Revwise: RPM Meter Tachometer
- Fretwright: Guitar Tab Maker
- Dimline: Photo Measure
- Needlewise: Embroidery Viewer
- Tautline: String Art Maker
- Foilcut: Stained Glass Pattern
- Beltwise: Belt Tension Meter
- Stacklight: Focus Stacking
- Foldsmith: Box Template Maker
- Slipwise: Boat Prop Calculator
- Phasewise: Speaker Polarity
- Goat Feed Calculator
- Drivetally: Teen Driving Log
- Crossmith: Speaker Crossover
- Tickline: Watch Timegrapher
- Jarwise: Canning Timer & Log
- Coinfold: Quarter Collection
- Pianowise: Piano Tuner
- Quiltsmith: Quilt Designer
- Stringbed: Tension Meter
- Lugline: Drum Tuner App
- Sloper: Sewing Pattern Maker
- Yokecraft: Sweater Patterns
- Makerledger: Craft Pricing
- Fair Innings: Baseball Lineup
- Boxsmith: Subwoofer Box Design
- Caprawise: Goat Milk & Kidding
- Spoolwise: Filament Tracker
- Hutchwise: Rabbit Breeding
- Hatchwise: Egg Hatch Tracker
- Livestock Feed Calculator
- Cattle Feed & Hay Calculator
- Pig Feed Calculator
- Wallpaper Calculator
- Poultry Feed Calculator
- Stair Calculator: Balusters
- Tile Calculator: Floor & Wall
- Mulch Calculator: Bags Needed
- Gravel Calculator: Tons & Bags
- Roof Pitch Gauge & Calculator
- Paint Calculator: Rooms & Cost