Beltwise: Belt Tension Meter
Fernhart Labs Tools In-app purchases Contains ads
Belt tension meter app: pluck a belt, read Hz and tension. 3D printer, bike, car
- Downloads
- 6+
- on Google Play
- Price
- Free
- In-app purchases
- Updated
- Nov 11
- 2026 · v1.0.0
Screenshots
Save to PinterestAbout Beltwise: Belt Tension Meter
Beltwise is a belt tension meter for your phone. Pluck a stopped belt like a guitar string:
Beltwise hears the frequency of the span, turns it into tension, and tells you whether to tighten or
loosen and by how much. It works for 3D printer belts, bicycle belt drives, car accessory belts,
V-belts and timing belts. Every feature is free: no account, no subscription, works offline.
WHAT IT MEASURES
- The span's frequency in Hz, from three plucks that agree within 2 %, with a confidence for each
reading. A pluck far from the others starts a new series instead of spoiling the reading.
- Tension in N, lbf or kgf from T = 4 x mass per metre x span^2 x frequency^2, the method of sonic
belt tension meters, with the mass of 46 standard belt sections built in (2M to 14M round tooth,
high-torque, MXL to XH, T5 to AT20, A to D and SPZ to SPC V-belts, PH to PM V-ribbed) or your own.
- Readings that halve or double ("only 25 Hz or 70 Hz") are the classic failure of belt frequency
apps. Beltwise finds the fundamental from the spacing of all the harmonics, so a 20 Hz bike belt
is read correctly even when the phone hears nothing below 80 Hz. A spectrum shows which harmonics
agreed.
- Every refused pluck says why: too soft, too loud, two plucks at once, a knock, another sound.
3D PRINTER BELT TENSION
- Belt A and Belt B matched: the app shows the difference and which belt to tighten, for CoreXY and
other two-belt printers.
- A 3D printer belt tuner that converts a documented frequency ("110 Hz on 150 mm") to the span you
actually pluck.
- 6 mm wide, 2 mm pitch round-tooth belts preset.
BICYCLE BELT TENSION
- Enter the frequency range from your bike's manual and pluck: in range, tighten or loosen.
- Long, low bike spans (30-80 Hz) are measured through their harmonics.
CARS, MACHINES, TIMING BELTS
- Type the target as a tension from the manual; Beltwise gives the frequency to aim for.
- Deflection check: how far to push the span (1/64 of its length) and the force to expect, and the
tension a measured deflection force means.
- Span from centre distance and pulley diameters.
KEEP TRACK
- Machines with their belts, targets and pairs; a history chart per belt; CSV export; backup and
restore to one file.
- Plays the target tone, to tune by ear as well.
- Calculator: frequency to tension and back, and a frequency moved to another span.
LIMITS, HONESTLY
- Tested on thousands of simulated plucks and on recordings of real plucked strings, not yet on real
belts with a calibrated tension meter. Tension figures are estimates that depend on the published
belt mass and the span you enter; stiff belts read somewhat high. A frequency target from your
maker is the most reliable way to use it.
- Never pluck a moving belt: switch the machine off and unplug it first. For engine timing belts,
follow the maker's procedure.
Sound is analysed on your phone and never recorded or sent. One optional purchase removes the ads.
Privacy policy: https://fernhartlabs.com/privacy
Beltwise hears the frequency of the span, turns it into tension, and tells you whether to tighten or
loosen and by how much. It works for 3D printer belts, bicycle belt drives, car accessory belts,
V-belts and timing belts. Every feature is free: no account, no subscription, works offline.
WHAT IT MEASURES
- The span's frequency in Hz, from three plucks that agree within 2 %, with a confidence for each
reading. A pluck far from the others starts a new series instead of spoiling the reading.
- Tension in N, lbf or kgf from T = 4 x mass per metre x span^2 x frequency^2, the method of sonic
belt tension meters, with the mass of 46 standard belt sections built in (2M to 14M round tooth,
high-torque, MXL to XH, T5 to AT20, A to D and SPZ to SPC V-belts, PH to PM V-ribbed) or your own.
- Readings that halve or double ("only 25 Hz or 70 Hz") are the classic failure of belt frequency
apps. Beltwise finds the fundamental from the spacing of all the harmonics, so a 20 Hz bike belt
is read correctly even when the phone hears nothing below 80 Hz. A spectrum shows which harmonics
agreed.
- Every refused pluck says why: too soft, too loud, two plucks at once, a knock, another sound.
3D PRINTER BELT TENSION
- Belt A and Belt B matched: the app shows the difference and which belt to tighten, for CoreXY and
other two-belt printers.
- A 3D printer belt tuner that converts a documented frequency ("110 Hz on 150 mm") to the span you
actually pluck.
- 6 mm wide, 2 mm pitch round-tooth belts preset.
BICYCLE BELT TENSION
- Enter the frequency range from your bike's manual and pluck: in range, tighten or loosen.
- Long, low bike spans (30-80 Hz) are measured through their harmonics.
CARS, MACHINES, TIMING BELTS
- Type the target as a tension from the manual; Beltwise gives the frequency to aim for.
- Deflection check: how far to push the span (1/64 of its length) and the force to expect, and the
tension a measured deflection force means.
- Span from centre distance and pulley diameters.
KEEP TRACK
- Machines with their belts, targets and pairs; a history chart per belt; CSV export; backup and
restore to one file.
- Plays the target tone, to tune by ear as well.
- Calculator: frequency to tension and back, and a frequency moved to another span.
LIMITS, HONESTLY
- Tested on thousands of simulated plucks and on recordings of real plucked strings, not yet on real
belts with a calibrated tension meter. Tension figures are estimates that depend on the published
belt mass and the span you enter; stiff belts read somewhat high. A frequency target from your
maker is the most reliable way to use it.
- Never pluck a moving belt: switch the machine off and unplug it first. For engine timing belts,
follow the maker's procedure.
Sound is analysed on your phone and never recorded or sent. One optional purchase removes the ads.
Privacy policy: https://fernhartlabs.com/privacy
Alternatives to Beltwise: Belt Tension Meter
Looking for apps like Beltwise: Belt Tension Meter? Here are 6 similar Android apps on Google Play. All of them are free to download.
-
Treewright: Family Tree Chart
-
Spotwright: Dance Formations
-
Clefwright: Sheet Music Maker
-
Spindlewise: CNC Simulator
-
Facetwise: STL & 3D Viewer
-
Tilthwise: Garden Planner
| App | Rating | Price | Installs | Last updated | Compare |
|---|---|---|---|---|---|
| Beltwise: Belt Tension Meter | – | Free | 5+ | Nov 11, 2026 | |
| Treewright: Family Tree Chart | – | Free | 0+ | Nov 20, 2026 | Compare |
| Spotwright: Dance Formations | – | Free | 0+ | Nov 19, 2026 | Compare |
| Clefwright: Sheet Music Maker | – | Free | 0+ | Nov 20, 2026 | Compare |
| Spindlewise: CNC Simulator | – | Free | 0+ | Nov 19, 2026 | Compare |
| Facetwise: STL & 3D Viewer | – | Free | 0+ | Nov 17, 2026 | Compare |
| Tilthwise: Garden Planner | – | Free | 0+ | Nov 16, 2026 | Compare |
Similar apps on Google Play
- Treewright: Family Tree Chart
- Spotwright: Dance Formations
- Clefwright: Sheet Music Maker
- Spindlewise: CNC Simulator
- Facetwise: STL & 3D Viewer
- Tilthwise: Garden Planner
- Poolsmith: Pool & Spa Care
- Velowise: Pitch Speed Radar
- Revwise: RPM Meter Tachometer
- Fretwright: Guitar Tab Maker
- Dimline: Photo Measure
- Needlewise: Embroidery Viewer
- Tautline: String Art Maker
- Foilcut: Stained Glass Pattern
- Stacklight: Focus Stacking
- Foldsmith: Box Template Maker
- Slipwise: Boat Prop Calculator
- Platterwise: Turntable Speed
- Phasewise: Speaker Polarity
- Goat Feed Calculator
- Drivetally: Teen Driving Log
- Crossmith: Speaker Crossover
- Tickline: Watch Timegrapher
- Jarwise: Canning Timer & Log
- Coinfold: Quarter Collection
- Pianowise: Piano Tuner
- Quiltsmith: Quilt Designer
- Stringbed: Tension Meter
- Lugline: Drum Tuner App
- Sloper: Sewing Pattern Maker
- Yokecraft: Sweater Patterns
- Makerledger: Craft Pricing
- Fair Innings: Baseball Lineup
- Boxsmith: Subwoofer Box Design
- Caprawise: Goat Milk & Kidding
- Spoolwise: Filament Tracker
- Hutchwise: Rabbit Breeding
- Hatchwise: Egg Hatch Tracker
- Livestock Feed Calculator
- Cattle Feed & Hay Calculator
- Pig Feed Calculator
- Wallpaper Calculator
- Poultry Feed Calculator
- Stair Calculator: Balusters
- Tile Calculator: Floor & Wall
- Mulch Calculator: Bags Needed
- Gravel Calculator: Tons & Bags
- Roof Pitch Gauge & Calculator
- Paint Calculator: Rooms & Cost