Boxsmith: Subwoofer Box Design
Fernhart Labs Tools In-app purchases Contains ads
Subwoofer box calculator & speaker box design: bass reflex, ports, cut sheet.
- Downloads
- 158+
- on Google Play
- Price
- Free
- In-app purchases
- Updated
- Nov 17
- 2026 · v1.2.0
Screenshots
Save to PinterestAbout Boxsmith: Subwoofer Box Design
Boxsmith is a subwoofer box calculator and speaker box design app that works the way desktop
tools do, on your phone: it simulates how your driver plays in a sealed, ported (bass reflex) or
bandpass box, sizes the port, and draws up the cut sheet. All of that is free: no subscription, no
account, no paywall on the results, and it works offline.
SIMULATION, NOT JUST A VOLUME
- Full Thiele-Small model of the driver and box, the same family of model desktop box-design programs use
- Graphs: response (SPL), maximum SPL, cone excursion against Xmax, port air speed, impedance and
group delay
- Set the amplifier power, a subsonic filter, a low-pass, bass boost and car cabin gain
- Max SPL that stops where the cone hits Xmax, the power rating or the port starts to chuff
- Overlay up to four designs and compare them side by side in a table
THE RIGHT BOX FOR YOUR SUB
- Sealed, ported and 4th-order bandpass boxes
- "Suggest a box" finds flat, deeper-bass and compact designs for your driver, keeping the port
buildable
- Warnings in plain words: past Xmax, a port that will chuff, a port pipe resonance or box standing
wave in your band, a load too low for the amp
- Multiple subs in one box, single or dual voice coils, every wiring option with its final load
PORTS DONE PROPERLY
- Slot or round ports, one or several, with the end correction included
- Port length for any tuning; one tap sizes the port to stay under the air-speed limit
- Tells you when the port needs an L-shaped bend
BUILD IT
- Enter the width and height that fit your trunk or room and fit the depth to the volume
- Wedge (sloped back) boxes for trucks and hatchbacks
- Net volume after the drivers, port and bracing are taken out, checked against the design
- 3D preview, cut list in inches and fractions or millimetres, double baffle, port panels
- Sheet layout on 4 × 8 ft or metric sheets with your saw kerf, and a PDF cut sheet
YOUR DRIVERS
- Type the T/S parameters from the spec sheet in any common units; Boxsmith works out the rest
- Every value is cross-checked: it warns when Qts disagrees, when Vas looks like cubic feet typed as
litres, or when Xmax looks peak-to-peak
- Share a driver as a file with a friend; import theirs
TOOLS
- Amp gain setting with a multimeter: the target voltage for your amp and load, test tones at 0,
-3, -6 or -10 dB (the level is always stated) and a slow sweep for rattles, played over Bluetooth
or saved as WAV files for a USB stick
- Subwoofer wiring calculator: up to 16 subs, 0.5 to 16 ohm coils, amps stable to 0.25 ohm
- Port length and tuning, box volume, quick sealed box
- Passive crossover values (1st to 4th order), L-pad and Zobel
BOXSMITH PRO (OPTIONAL, ONE-TIME)
- Transmission-line (T-line) boxes: line length or tuning, taper, driver position and mouth air
speed, simulated as a real duct, with a fold plan and the dividers in the cut list
- Isobaric pairs (clamshell or tunnel): half the box for the same bass, parallel or series
- Passive radiator boxes with the mass to add for your tuning
- 6th-order bandpass: both chambers vented, each with its own tuning and port
- Measured in-car response: import your car's transfer function and every graph uses it
- One purchase, no subscription, and it removes ads. Everything else stays free
YOUR DATA STAYS YOURS
- Everything is stored on your phone: no account, no cloud
- Back up every driver and design to one file and restore it on a new phone
In English, Spanish, Portuguese, German, French and Italian. Imperial or metric. The simulation uses
the standard lumped model with 25 °C air; real boxes differ a little, so check your build before
you cut.
Subwoofer box calculator, speaker box design, bass reflex calculator, ported box calculator, T-line
box, port length calculator, car audio enclosure design: Boxsmith, free and ad-supported, from
Fernhart Labs.
tools do, on your phone: it simulates how your driver plays in a sealed, ported (bass reflex) or
bandpass box, sizes the port, and draws up the cut sheet. All of that is free: no subscription, no
account, no paywall on the results, and it works offline.
SIMULATION, NOT JUST A VOLUME
- Full Thiele-Small model of the driver and box, the same family of model desktop box-design programs use
- Graphs: response (SPL), maximum SPL, cone excursion against Xmax, port air speed, impedance and
group delay
- Set the amplifier power, a subsonic filter, a low-pass, bass boost and car cabin gain
- Max SPL that stops where the cone hits Xmax, the power rating or the port starts to chuff
- Overlay up to four designs and compare them side by side in a table
THE RIGHT BOX FOR YOUR SUB
- Sealed, ported and 4th-order bandpass boxes
- "Suggest a box" finds flat, deeper-bass and compact designs for your driver, keeping the port
buildable
- Warnings in plain words: past Xmax, a port that will chuff, a port pipe resonance or box standing
wave in your band, a load too low for the amp
- Multiple subs in one box, single or dual voice coils, every wiring option with its final load
PORTS DONE PROPERLY
- Slot or round ports, one or several, with the end correction included
- Port length for any tuning; one tap sizes the port to stay under the air-speed limit
- Tells you when the port needs an L-shaped bend
BUILD IT
- Enter the width and height that fit your trunk or room and fit the depth to the volume
- Wedge (sloped back) boxes for trucks and hatchbacks
- Net volume after the drivers, port and bracing are taken out, checked against the design
- 3D preview, cut list in inches and fractions or millimetres, double baffle, port panels
- Sheet layout on 4 × 8 ft or metric sheets with your saw kerf, and a PDF cut sheet
YOUR DRIVERS
- Type the T/S parameters from the spec sheet in any common units; Boxsmith works out the rest
- Every value is cross-checked: it warns when Qts disagrees, when Vas looks like cubic feet typed as
litres, or when Xmax looks peak-to-peak
- Share a driver as a file with a friend; import theirs
TOOLS
- Amp gain setting with a multimeter: the target voltage for your amp and load, test tones at 0,
-3, -6 or -10 dB (the level is always stated) and a slow sweep for rattles, played over Bluetooth
or saved as WAV files for a USB stick
- Subwoofer wiring calculator: up to 16 subs, 0.5 to 16 ohm coils, amps stable to 0.25 ohm
- Port length and tuning, box volume, quick sealed box
- Passive crossover values (1st to 4th order), L-pad and Zobel
BOXSMITH PRO (OPTIONAL, ONE-TIME)
- Transmission-line (T-line) boxes: line length or tuning, taper, driver position and mouth air
speed, simulated as a real duct, with a fold plan and the dividers in the cut list
- Isobaric pairs (clamshell or tunnel): half the box for the same bass, parallel or series
- Passive radiator boxes with the mass to add for your tuning
- 6th-order bandpass: both chambers vented, each with its own tuning and port
- Measured in-car response: import your car's transfer function and every graph uses it
- One purchase, no subscription, and it removes ads. Everything else stays free
YOUR DATA STAYS YOURS
- Everything is stored on your phone: no account, no cloud
- Back up every driver and design to one file and restore it on a new phone
In English, Spanish, Portuguese, German, French and Italian. Imperial or metric. The simulation uses
the standard lumped model with 25 °C air; real boxes differ a little, so check your build before
you cut.
Subwoofer box calculator, speaker box design, bass reflex calculator, ported box calculator, T-line
box, port length calculator, car audio enclosure design: Boxsmith, free and ad-supported, from
Fernhart Labs.
Alternatives to Boxsmith: Subwoofer Box Design
Looking for apps like Boxsmith: Subwoofer Box Design? Here are 3 similar Android apps on Google Play. The highest rated is Road to Hana & Maui Tour Guide (4.8/5), and all 3 are free to download.