Spindlewise: CNC Simulator
Fernhart Labs Education In-app purchases Contains ads
G-code simulator for CNC lathe and mill: check programs, see the cut, cycle time
- Price
- Free
- In-app purchases
- Updated
- Nov 19
- 2026 · v1.0.1
Screenshots
Save to PinterestAbout Spindlewise: CNC Simulator
Spindlewise is a CNC simulator for the lathe and the mill: type or open a G-code program, watch it cut the stock in 2D and 3D, and let it find the mistakes before the program goes near a machine. A G-code simulator for students, apprentices and machinists, fully offline.
FREE, AND NOT CUT DOWN
- Any stock size and an unlimited tool table, free. Copy and paste, search and replace, the whole checker and the full machine are free too.
- Purchases go through Google Play and restore normally on a new phone. No account, no subscription.
- One banner, only on the program list and the reference. Never in the editor or during a run, and no full-screen ads.
SIMULATE A LATHE OR A MILL
- CNC lathe: a half-section that updates as the program runs, with the insert, its holder and the chuck jaws, then the turned part in 3D. Facing, turning, boring, grooving, parting and threads.
- CNC mill or router: the part as a 3D height map cut by flat, ball and bull-nose cutters, drills and taps.
- Cycle start, single block, feed hold, reset, 1x to 50x speed and a slider back to any line. Work, machine, relative and distance-to-go readouts, F, S, T and the active codes.
THE G-CODE IT READS
- ISO-style G-code: G0 to G3 (I/J/K or R), planes, inch and mm, absolute and incremental, cutter and nose radius compensation, tool length, G54 to G59, feed per minute or per rev, constant surface speed with a limit, tool changes, coolant and subprograms.
- Drilling cycles G73 and G81 to G89. Lathe cycles for roughing, finishing, grooving, peck drilling and threading (ISO 68-1 depths).
- A dialect panel for the differences between controls: diameter or radius X, decimal point rules, arc centers, two lathe code families, block delete and optional stop.
CHECK BEFORE YOU CUT
- Every finding has its line number; tap it to jump there in the editor.
- Rapids into the stock, holder or jaws hitting the part, cuts with the spindle off or no feed, missing tools, arcs that don't close, travel and speed limits, missing cycle words and more.
- Cycle time per tool, with acceleration, and the material removed.
A REAL EDITOR
- Line numbers, syntax colors, undo and redo, search and replace, go to line, a G-code key row and autosave.
- Open .nc, .tap, .ngc, .gcode, .txt and other program files from the picker, "Open with" or Share. No storage permission.
LEARN
- 20 sample programs (10 lathe, 10 mill) with exercises, and a G and M code reference in our own words.
PRO (ONE-TIME, ALSO REMOVES ADS)
Everything above is free. The optional Pro adds generators that write commented programs from a few numbers (lathe facing, profiles, grooves, parting and threads; mill facing, pockets, contours, bolt circles and hole grids), a setup sheet PDF, STL export of the part and DXF export of a turned profile. Generated programs go through the free checker. A separate one-time purchase only removes the banner.
HONEST LIMITS
- A simulator, not a guarantee. Real controls differ in dialect, cycles and settings: always prove a program on the machine with single block and the feed override low.
- Not CAM: it doesn't make programs from 3D models.
- 3 axes on the mill, 2 on the lathe.
- Collision checks use simple shapes, and the cut is a grid of finite resolution. Cycle times are estimates.
- Tested on programs we wrote and values worked out by hand, never on a real machine.
Privacy: https://fernhartlabs.com/privacy
FREE, AND NOT CUT DOWN
- Any stock size and an unlimited tool table, free. Copy and paste, search and replace, the whole checker and the full machine are free too.
- Purchases go through Google Play and restore normally on a new phone. No account, no subscription.
- One banner, only on the program list and the reference. Never in the editor or during a run, and no full-screen ads.
SIMULATE A LATHE OR A MILL
- CNC lathe: a half-section that updates as the program runs, with the insert, its holder and the chuck jaws, then the turned part in 3D. Facing, turning, boring, grooving, parting and threads.
- CNC mill or router: the part as a 3D height map cut by flat, ball and bull-nose cutters, drills and taps.
- Cycle start, single block, feed hold, reset, 1x to 50x speed and a slider back to any line. Work, machine, relative and distance-to-go readouts, F, S, T and the active codes.
THE G-CODE IT READS
- ISO-style G-code: G0 to G3 (I/J/K or R), planes, inch and mm, absolute and incremental, cutter and nose radius compensation, tool length, G54 to G59, feed per minute or per rev, constant surface speed with a limit, tool changes, coolant and subprograms.
- Drilling cycles G73 and G81 to G89. Lathe cycles for roughing, finishing, grooving, peck drilling and threading (ISO 68-1 depths).
- A dialect panel for the differences between controls: diameter or radius X, decimal point rules, arc centers, two lathe code families, block delete and optional stop.
CHECK BEFORE YOU CUT
- Every finding has its line number; tap it to jump there in the editor.
- Rapids into the stock, holder or jaws hitting the part, cuts with the spindle off or no feed, missing tools, arcs that don't close, travel and speed limits, missing cycle words and more.
- Cycle time per tool, with acceleration, and the material removed.
A REAL EDITOR
- Line numbers, syntax colors, undo and redo, search and replace, go to line, a G-code key row and autosave.
- Open .nc, .tap, .ngc, .gcode, .txt and other program files from the picker, "Open with" or Share. No storage permission.
LEARN
- 20 sample programs (10 lathe, 10 mill) with exercises, and a G and M code reference in our own words.
PRO (ONE-TIME, ALSO REMOVES ADS)
Everything above is free. The optional Pro adds generators that write commented programs from a few numbers (lathe facing, profiles, grooves, parting and threads; mill facing, pockets, contours, bolt circles and hole grids), a setup sheet PDF, STL export of the part and DXF export of a turned profile. Generated programs go through the free checker. A separate one-time purchase only removes the banner.
HONEST LIMITS
- A simulator, not a guarantee. Real controls differ in dialect, cycles and settings: always prove a program on the machine with single block and the feed override low.
- Not CAM: it doesn't make programs from 3D models.
- 3 axes on the mill, 2 on the lathe.
- Collision checks use simple shapes, and the cut is a grid of finite resolution. Cycle times are estimates.
- Tested on programs we wrote and values worked out by hand, never on a real machine.
Privacy: https://fernhartlabs.com/privacy
Alternatives to Spindlewise: CNC Simulator
Looking for apps like Spindlewise: CNC Simulator? Here are 6 similar Android apps on Google Play. All of them are free to download.
-
Treewright: Family Tree Chart
-
Spotwright: Dance Formations
-
Clefwright: Sheet Music Maker
-
Facetwise: STL & 3D Viewer
-
Tilthwise: Garden Planner
-
Poolsmith: Pool & Spa Care
| App | Rating | Price | Installs | Last updated | Compare |
|---|---|---|---|---|---|
| Spindlewise: CNC Simulator | – | Free | 0+ | Nov 19, 2026 | |
| Treewright: Family Tree Chart | – | Free | 0+ | Nov 20, 2026 | Compare |
| Spotwright: Dance Formations | – | Free | 0+ | Nov 19, 2026 | Compare |
| Clefwright: Sheet Music Maker | – | Free | 0+ | Nov 20, 2026 | Compare |
| Facetwise: STL & 3D Viewer | – | Free | 0+ | Nov 17, 2026 | Compare |
| Tilthwise: Garden Planner | – | Free | 0+ | Nov 16, 2026 | Compare |
| Poolsmith: Pool & Spa Care | – | Free | 0+ | Nov 14, 2026 | Compare |
Similar apps on Google Play
- Treewright: Family Tree Chart
- Spotwright: Dance Formations
- Clefwright: Sheet Music Maker
- Facetwise: STL & 3D Viewer
- Tilthwise: Garden Planner
- Poolsmith: Pool & Spa Care
- Velowise: Pitch Speed Radar
- Revwise: RPM Meter Tachometer
- Fretwright: Guitar Tab Maker
- Dimline: Photo Measure
- Needlewise: Embroidery Viewer
- Tautline: String Art Maker
- Foilcut: Stained Glass Pattern
- Beltwise: Belt Tension Meter
- Stacklight: Focus Stacking
- Foldsmith: Box Template Maker
- Slipwise: Boat Prop Calculator
- Platterwise: Turntable Speed
- Phasewise: Speaker Polarity
- Goat Feed Calculator
- Drivetally: Teen Driving Log
- Crossmith: Speaker Crossover
- Tickline: Watch Timegrapher
- Jarwise: Canning Timer & Log
- Coinfold: Quarter Collection
- Pianowise: Piano Tuner
- Quiltsmith: Quilt Designer
- Stringbed: Tension Meter
- Lugline: Drum Tuner App
- Sloper: Sewing Pattern Maker
- Yokecraft: Sweater Patterns
- Makerledger: Craft Pricing
- Fair Innings: Baseball Lineup
- Boxsmith: Subwoofer Box Design
- Caprawise: Goat Milk & Kidding
- Spoolwise: Filament Tracker
- Hutchwise: Rabbit Breeding
- Hatchwise: Egg Hatch Tracker
- Livestock Feed Calculator
- Cattle Feed & Hay Calculator
- Pig Feed Calculator
- Wallpaper Calculator
- Poultry Feed Calculator
- Stair Calculator: Balusters
- Tile Calculator: Floor & Wall
- Mulch Calculator: Bags Needed
- Gravel Calculator: Tons & Bags
- Roof Pitch Gauge & Calculator
- Paint Calculator: Rooms & Cost