Star Tri-Color Programmer

The Star DLITMC, DLXTMC, and DLTTMC have a large number of features built into them. You can now program these features using an approved smart phone with the Tri-Color Flasher!

The system works using the flash on your phone to send data to a sensor on the device. Simply set up your light as described in the manual, select your options, hold your phone flash near the sensor, and program your light in seconds!

NOTE: THE SYSTEM WILL ASK FOR PERMISSION TO TAKE PICTURES AND RECORD. CAMERA ACCESS IS REQUIRED TO USE THE FLASH. THIS APP WILL NOT CAPTURE IMAGES OR RECORD MEDIA.

You can program:

1. Patterns for each of the 3 enable wires.
2. Which colors are enabled by each enable wire.
3. Phases
4. Functionality such as steady burn, cruise, and auto-dim.

Compatibility: The app has been tested on the below list of phones, which will properly flash the light at the correct rate. It may also work on other models.

Samsung S7, S8, Note 8, S9
Google pixel 3XL
ACTEL FIERCE: 5049Z
Acatel A30 Fierce
Moto G6

(Note: Most phones designed before 2016 are not supported, or do not have a suitable flash.)

Appended Tag Description:
Star1889, DLITMC , DLXTMC , DLTTMC , Star Signal, Flasher, Headlight & Lantern Co