Star Signal SB44 Controller

About Star Signal SB44 Controller

Wireless programming software for the Star Signal SB44 8-Button keypad from Star Headlight & Lantern Co..

The Star SB44 has a large number of features built into it. You can now program these features using an approved smart phone with the SB44 Light Controller.

The system works using the flash on your phone to send data to a sensor on the SB44 device. Simply set up your light as described in the manual, select your desired configuration, hold your phone flash near the sensor, and program your light in seconds!

NOTE: THE SYSTEM WILL ASK FOR PERMISSION TO TAKE PICTURES AND RECORD. CAMERA ACCESS IS REQUIRED TO USE THE FLASH. THIS APP WILL NOT CAPTURE IMAGES OR RECORD MEDIA.

You can program:
1. Patterns
2. General Settings
3. Phases
4. Functionality such as cruise/steady
5. Traffic functionalities
6. Quick enable/disable for each button
7. Latched/Momentary settings for each button

Compatibility: The 8-Button Keypad Flasher has been tested on the below list of phones, which will properly flash the light at the correct rate. It may also work on other models.

Samsung S7 Edge
Google Pixel 3XL
ACTEL FIERCE: 5049Z
Acatel A30 Fierce

(Note: Most phones designed before 2016 are not supported, or do not have a suitable flash.)