Camper Van Build Planner 3D

VanCurve 3D lets you plan a camper van conversion inside the real, curved body of your van — in 2D and in 3D, with every piece weighed. Pick your van from 150+ models (or measure your own), drop in furniture and appliances, and see at once what touches the curved roof or a wheel arch, how much payload is left and whether the load is balanced. Works offline, with no account and no ads.

BUILT AROUND THE REAL VAN
• 150+ vans and bases: Ford Transit, Mercedes Sprinter, Ram ProMaster, VW Crafter and Transporter, Fiat Ducato, Renault, Peugeot, Iveco, Toyota, electric vans, school buses, box trucks and trailers.
• The body is drawn from its real cross-sections, not as a box: walls lean, the roof crowns and the wheel arches stand in the floor.
• Every vehicle says how good its data is (partial, estimated or measured by you). Measure yours and tap Change the size: your numbers replace ours.
• Not a van? Build inside your own rectangle: a trailer, a cabin, a room.

DESIGN IN 2D AND 3D
• One model, two views: a precise plan with live dimensions, and a 3D view with the cab, the wheels and an orbit camera.
• 170+ pieces: beds, galleys, fridges, showers, U-shaped sofas, batteries, inverters, solar panels, tanks, heaters, awnings and racks. Each is drawn as what it is, with a realistic weight.
• People: set a man's or a woman's height and weight and see them standing, sitting and lying to check headroom and bed length.
• Rotate, lock, copy and mirror. "Rests on" keeps a mattress on its platform when you move it. Finishes for wood, fronts, worktops, upholstery, walls and floor.

COLLISIONS AND FIT
• Instant warnings when a piece hits the roof, a wall or a wheel arch, measured against the curved body.
• Fit moves a piece clear or makes it lower or shallower. With Pro it also cuts the piece to follow the curve of the wall and gives you a template to print.
• Add the wheel wells and steps your van has, or tell the app you will cut around an arch yourself.

WEIGHT, BALANCE AND PAYLOAD
• Every piece has a weight: typed, calculated from its panels, or an estimate that follows its size.
• Payload left, front and rear axle loads, a left-to-right level that shows which side is heavy, and the load on each wheel.
• Height of the centre of gravity, and an optional EU motor-caravan minimum payload check.
• Estimates are always labelled as estimates. VanCurve 3D is a planning aid, not a certification: weigh the real van.

THE WHOLE BUILD
• Water: days of water and tank weight. Electrical: batteries, solar and loads, and how many days you last without sun.
• Budget with your own prices, labour and currency.
• Parts and cut list: every panel and bar by piece or material. With Pro, a sheet plan shows how many sheets to buy, with your saw's kerf.
• Share a one-page PDF, PNG pictures, a parts list in CSV and a project file you can open on another phone.

FREE AND PRO
Free: the whole van catalogue, 2 projects, 2D and 3D design with the whole library, collision, weight and balance warnings, water, electrical and budget, the parts list and an overview PDF.
Pro is one payment, with no subscription and no ads: unlimited projects and saved versions, Fit cuts that follow the curve, several load scenarios side by side, the sheet plan, all PDF reports, SVG and DXF drawings and cost tracking.

Available in 8 languages: English, Español, Português, Deutsch, Français, Italiano, Nederlands and Polski.

WHAT'S NEW IN 1.1
Suggest a layout from a checklist. L-, U- and T-shaped furniture. 25 more vans (179 in all), each with a data-confidence badge. Tighter sheet nesting in the cut list. Pro: cable and fuse size estimates (planning estimate only). A shareable picture card of your design.