Back to Top
eCommission SmartX Controllers Screenshot 0
eCommission SmartX Controllers Screenshot 1
eCommission SmartX Controllers Screenshot 2
eCommission SmartX Controllers Screenshot 3

About eCommission SmartX Controllers

The eCommission SmartX Controllers mobile application is revolutionizing the commissioning process by providing workflows tailored specifically for Technicians, Electricians, and Flow Balancers to access SmartX IP Controllers directly via their mobile devices. This mobile application allows for device configuration (including network settings), I/O checkout operations, and flow balancing across all SmartX IP Controllers. The mobile application is ideal for all skillsets including those who are not so familiar with the system. The mobile application allows for:
1. Reduced commissioning time: The mobile application does not require an EcoStruxure BMS server to be present in the system, so users can get started with network settings or programming the controllers as soon as they are powered.
2. Simplified workflows: The mobile application provides users with the exact tools they need to carry out their tasks and nothing more.
3. Direct configuration and programming: Users can configure and load applications directly into the SmartX IP Controllers from their mobile devices.
4. Report generation and status check: Users can generate and view I/O Checkout reports, Balancing reports, and Diagnostic reports as well as check status of the progress directly from their mobile devices.
5. Elimination of dependencies: The eCommission SmartX Controllers mobile application allows projects to work around obstacles, overcome project roadblocks, and eliminate dependencies on network infrastructure.
There are two ways to connect the eCommission SmartX Controllers mobile application to SmartX IP Controllers:
1. Via WiFi access point - By setting up a WiFi access point, you will be able to connect your mobile device with all SmartX IP Controllers on your local wireless network.
2. Via BLE - The eCommission SmartX Controllers mobile application can connect to a single SmartX IP Controller via the eCommission Bluetooth Adapter (which is directly connected to a SmartX Sensor) or directly to an RP-C controller via its onboard BLE.
The eCommission SmartX Controller mobile application is available at no charge to all Schneider Electric authorized System Integrators working with SmartX IP Controllers.

Similar Apps - visible in preview.

InsightMobile SE

InsightMobile SE

2.8

Schneider Electric's monitoring app for off-grid and grid-tied solar and storage applications....

EcoStruxure IT

EcoStruxure IT

3.3

EcoStruxure IT enables IT users to mitigate and anticipate risk of failure...

Строительные расценки UA Pro

Строительные расценки UA Pro

0.0

Если Вы строитель, или же собираетесь строить дом или заняться ремонтом, то...

Vijeo Design'Air FREE

Vijeo Design'Air FREE

0.0

Vijeo Design’Air FREE is the full Vijeo Design’Air application with the following...

EliwellAIR

EliwellAIR

0.0

The Mobile Application is a diagnostics, maintenance and software management tool targeted...

SMART TC°

SMART TC°

0.0

The SMART TC ° App allows you to control your heating installation...

author
Allows you to advance the project in absence of the full project infrastructure being in place. Also provides a useful secondary interface to the local network.
Mick Morley