NTRIP Client for USB by Bluecover

The NTRIP Client allows to connect and provide corrections to your RTK GNSS receiver (rover). It gets GNSS corrections typically via Internet (or via IP private network) and sends them out the serial port of your rover. The application include the following features:
– Extract messages and collect statistics from a NTRIP caster (fully compatible with the NTRIP/RTCM3 protocol);
– Check the status of the RTK receiver through the Android OTG USB port (requires an OTG cable connected to a GNSS receiver);
– Push corrections to the USB port of the RTK receiver.

For further information check our quick guide at https://www.bluecover.pt/ntripclient4usb/ and provide us your feedback to [email protected].