Simple USB Serial Terminal for Serial Port Communication over USB-OTG
INTRODUCTION:
- One-of-a-kind App that gives you compatibility with Serial Devices like CP210X, FTDI, PL2303, CH34X and CDC/ACM devices.
- This app can send and receive commands via Serial Devices so you can debug your hardware problems easily.
- Connect your Serial Devices to Mobile using OTG-Cable.
FEATURES:
- Baud Rate, Data Bits, Parity Checks, and Stop Bits setting Option
- Separate panels for sending and receiving data.
- Custom your own buttons for frequent sending of same data.
- Monitoring receiving data as ASCII or HEX.
- Sending Data as ASCII or HEX.
- Selection for \r \n at the end of sending data.
- Simple copy option in sent data just long press on data.
- Send Log file of Received and Sent data.
- Keep Screen on/off option.
- Font Size option.
- Remove Ads option.
NOTE:
- Android device must support USB Host mode.
- By default, Received data in ASCII format and It can be changed from top MENU.
- By default, Data sent in ASCII format and It can be changed from long pressing of particular Button.
- By default, \r\n will be sent on every sending data and It can be changed from long pressing of particular Button.
INTRODUCTION:- One-of-a-kind App that gives you compatibility with all microcontrollers. All you...
INTRODUCTION:- This app is used by Electronics people for hardware testing and...
INTRODUCTION:- Bluetooth Controller is used to remotely control any devices with serial...
INTRODUCTION:- One-of-a-kind App that works based on UDP Protocol, Using this app...
INTRODUCTION:-WiFi Controller is used to send and receives messages to Arduino with...
INTRODUCTION:- One-of-a-kind App that is used for scanning nearby BLE device and...
Created with AppPage.net
Similar Apps - visible in preview.