Spillway Remote

Spillway puts your loudspeaker processor on your iPad: mutes, levels, delay, output polarity and EQ for every module, and for the groups you already use, from anywhere on the show network. Made for iPad, used in landscape. Everything you see is read back from the processor, so the screen always shows what the hardware is doing. Changes are heard as you make them: faders and EQ move the sound while your finger moves, not after you let go. • Mute, gain and delay for each input and output, with delay shown in ms, feet and metres. • Parametric EQ on a live response graph: bells, shelves and a flat-topped Plateau band. Select a filter, then drag it on the graph and pinch to change its width. • Advanced (in Settings): high- and low-pass filters with 12 or 24 dB slopes, and three wide Broad EQ bands. • Groups: create, name and edit groups stored in the processor, shared with your other control software. • Optional live level meters for the selected module. • Show mode softens every change for live use; the lock freezes the screen between changes. • Optional live measurement overlay from a compatible analyser on the same network. • A Demo processor is built in, so you can try every control without any hardware. • Light, dark or system appearance. Works with Lake-series processors (tested with the LM 44 and LMX 48). Spillway is independent and not affiliated with, endorsed by or sponsored by Music Tribe or Lab.gruppen. All trademarks belong to their owners.