3D Box Maker

3D Box Maker is a builder for 3D-printable boxes and enclosures. Set the sizes, add holes, boards and a lid, then save STL or 3MF files ready for your slicer. BODY • Width, depth, wall height, wall and floor thickness, corner radius • Overall and inside dimensions shown as you edit HOLES AND STANDOFFS • Holes in the floor, any wall and the lid: round, rectangular, slots, hexagons • Connector cut-outs: USB-C, USB-A, HDMI, RJ45, DB9, audio, DC power, keystone jacks • PCB standoffs with screw holes • Arrays of identical holes and standoffs: set the step and the count BOARDS • More than 100 templates: Raspberry Pi, Arduino, ESP32, Teensy, sensors, interface converters, motor drivers, displays and more • Your own board with its size, mounting holes and ports • A standoff under every mounting hole and port cut-outs in the walls, added for you • Ribs under the board and a clamp: screw posts with a T piece LID • A lid with a lip and an adjustable clearance • Screw fastening: corner bosses with a 45° taper that print without supports • Engraving from an SVG drawing: cut it into the lid or fill it in another colour as an inlay for two-colour printing PREVIEW AND EXPORT • 3D preview: isometric, top, front and side views, lid lifted off • Warnings when a board does not fit, a hole runs past an edge or a standoff is taller than the walls • Undo and redo • STL and 3MF export: base, lid and inlay as separate files; the 3MF of a lid with an inlay holds two coloured bodies • A 1:1 floor sheet to print for marking out PRIVATE AND OFFLINE The app works without the internet and without an account. Your boxes and files stay on your device only — we collect nothing and send nothing anywhere. Ukrainian and English, light and dark theme. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Terms of Service: https://api3d.serenity.games/legal/terms Privacy Policy: https://api3d.serenity.games/legal/privacy Deleting your data: https://api3d.serenity.games/legal/delete