Taller SMD: reparar placas

SMD Workshop is a simulator for learning to diagnose and repair electronic boards, from scratch and without the risk of damaging anything.

Each case is a board with a hidden fault. You read the symptom, take measurements, find the damaged component, replace it, and power on the board to verify that it's working. Just like in a real workshop.

TOOLS FROM A REAL WORKSHOP
• Multimeter: voltage, resistance, continuity, and diode mode.

• Oscilloscope: view the signals, clock, and ripple of the power supplies.

• Laboratory power supply: powers the board with a limited current and injects voltage to find short circuits.

• Thermal camera: discover the component that is overheating without touching anything.

• Magnifying glass and network viewer: touch a pad and all connected points are highlighted.

THREE BOARDS, 29 REPAIR CASES
• Practice board: 5V input, 3.3V regulator, and microcontroller.

• Phone: battery, regulators, buck converter, processor, and screen backlight.

• Laptop: 19V charger, fuse, 5V converter, and embedded controller.

Short circuits, open circuits, cold solder joints, leakage currents, shorted MOSFETs, and more. Each case concludes with a lesson applicable to any circuit board.

LEARN STEP BY STEP
• 10 short lessons: one tool and one component at a time.

• A guided tutorial for your first complete repair.

• Datasheet for each component: what it is, how to measure it, and its typical failures.

• Choose your level: beginner, intermediate, or advanced.

TO KEEP PRACTICING
• Random mode: random failures to test your method.

• Star ratings based on how well you diagnosed each case.

The simulation calculates circuit voltages, currents, and temperatures, so what you measure behaves just like on a real circuit board.

Available in 10 languages: Spanish, English, Portuguese, French, German, Russian, Chinese, Hindi, Arabic, and Indonesian.

The game is free and contains ads. You can remove them with an optional one-time purchase.