About DISI Link: Torque Pro Plugin
Unlock the full diagnostic potential of your Mazdaspeed with DISI Link for Torque PRO! 🚀
Whether you daily drive a Mazdaspeed 3, carve canyon roads in a Mazdaspeed 6, or cruise in a CX-7 Turbo, you know that the MZR 2.3 DISI Turbo engine is a unique beast. Standard OBD-II scanners only scratch the surface—leaving out the vital sensors you need to keep your direct-injection turbo engine healthy and running strong.
DISI Link is your friendly, one-tap companion plugin for Torque Pro. It injects factory-grade extended diagnostic PIDs directly into Torque Pro’s internal database—no confusing hex codes, no manual formula typing, and zero hassle!
🛡️ Why Mazdaspeed Owners Love DISI Link
The MZR 2.3 DISI engine is sensitive to fuel starvation and pre-ignition. DISI Link puts the most critical safety sensors right onto your Torque Pro dashboard:
High-Pressure Fuel Pump (HPFP) Monitoring: Track HPFP Actual vs. HPFP Desired fuel rail pressure in real time to guard against pressure drops and lean spikes under boost.
True Linear Wideband AFR: Real-time Air/Fuel Ratio directly from the factory wideband O2 sensor.
Knock Retard (KR): Generation-calibrated timing retard so you know immediately if your engine detects detonation.
Post-Intercooler Boost Air Temp (BAT): Keep an eye on actual intake manifold charge temperatures, not just ambient airbox temps.
Intake & Boost Dynamics: Real-time Wastegate Duty Cycle (WGDC), relative Boost pressure, raw MAF voltage, and Calculated Load.
Emissions & Evaporative Diagnostics: Commanded EGR position, EGR system error percentage (great for diagnosing carbon buildup or sticking valves), and EVAP canister purge duty.
⚡ Seamless, One-Tap Experience
Forget about manual PID configurations or outdated CSV imports. DISI Link does the heavy lifting:
Automatic Torque Detection: DISI Link detects whether Torque Pro is installed on your device.
One-Tap Injection: Tap your generation’s button, and all custom PIDs are securely injected straight into Torque Pro in less than a second!
Clean Gauge Labels: In Torque Pro, PIDs are organized with a neat [DISI] tag for easy searching, while your gauge dials keep short, clean labels (KR, BAT, HPFP Act, AFR).
📺 Built for In-Car Android Head Units
Running an aftermarket Android head unit (such as Eonon, Atoto, Joying, or Dasaita) in your center console? DISI Link features an optimized horizontal cockpit mode with a responsive two-column layout:
Left Pane: Instant injection and quick shortcuts designed with driver-friendly touch targets.
Right Pane: Interactive, searchable PID catalog with category filters.
🚗 Vehicle Compatibility
Engineered exclusively for vehicles powered by the Mazda MZR 2.3 DISI Turbo engine (L3-VDT):
Mazdaspeed 3 / Mazda 3 MPS (Gen 1 BK • 2006–2009)
Mazdaspeed 3 / Mazda 3 MPS (Gen 2 BL • 2010–2013)
Mazdaspeed 6 / Mazda 6 MPS / Mazdaspeed Atenza (GG • 2005–2007)
Mazda CX-7 (ER • 2.3L DISI Turbo • 2006–2012)
🔒 100% Offline & Privacy-First
No Ads, No Tracking: DISI Link does not collect personal data, analytics, or driving logs.
Works Completely Offline: Once injected, your custom PIDs are permanently stored in Torque Pro. You don't need cellular service at the track or in remote areas.
Battery & RAM Friendly: The app only connects to Torque during the single injection tap, preventing background battery drain.
📖 Quick 3-Step Setup
Open DISI Link and tap Inject for your generation (Gen 1, Gen 2, or All Sets).
Open Torque Pro → Settings → Manage extra PIDs/Sensors.
Tap the menu dots (⋮) → Add predefined set → Select Mazdaspeed DISI.
That's it! Your custom sensors are now ready to add to any Torque dashboard dial or graph.
Disclaimer: DISI Link is an independent companion plugin and is not affiliated with, endorsed by, or sponsored by Mazda Motor Corporation or Ian Hawkins (Torque Pro). All trademarks, vehicle names, and logos belong to their respective owners.
