CoreSwitch

CoreSwitch puts your Blackmagic ATEM production switcher in your hand.

Whether you are running a church service, a school event, or a small live show, you should not have to stay glued to the desk just to change cameras. CoreSwitch connects to your ATEM over Wi‑Fi and gives you the controls you use most — Program and Preview buses, CUT and AUTO, fade to black, and a transition bar — on a phone or tablet layout that stays readable in a dark control room.

Discover your switcher on the network, connect once, and start working. The app is built for real production use: clear Program and Preview colors, tablet layouts that echo familiar switcher software when you want them, and tools that unlock as you need them.

WHAT YOU CAN DO

• Find and connect to your ATEM on the same network
• Switch cameras with Program / Preview, CUT, AUTO, and FTB
• Drive transitions and keyers when you unlock Pro
• Mix Fairlight (or classic) audio from your phone
• Route outputs, color generators, media, streaming, recording, macros, and camera control on higher plans
• Use Touch Multiview to see the mixer’s multiview on your phone and tap cameras to switch

TOUCH MULTIVIEW

Your ATEM sends multiview over USB to a Windows PC (Windows sees it as a webcam). Install the free CoreSwitch Multiview Bridge on that PC, keep the phone and PC on the same Wi‑Fi, then open Touch Multiview in the app. Tap a camera for Preview, double-tap to cut — so you can stand in the room and still see the full grid.

Download the Windows companion here:
https://rozhawebdesigns.com/technologies/coreswitch-windows

PLANS

Try CoreSwitch free when you connect (short demo session). Unlock lifetime plans when you are ready:

• Basic — Program, Preview, CUT, AUTO, FTB, transition bar
• Pro — transitions, keyers, Audio, Output, Color
• Ultimate — Media, Stream, Macros, Camera control, and the full toolkit

Touch Multiview is free to use whether or not you purchased a plan

Phone and tablet are supported in one app. Larger screens can use denser layouts inspired by desktop switcher software.

App site: https://rozhawebdesigns.com/technologies/coreswitch/

REQUIREMENTS

• A Blackmagic ATEM switcher on your local network
• Phone or tablet on the same Wi‑Fi / LAN
• For Touch Multiview: a Windows PC with the mixer connected by USB, plus Multiview Bridge

CoreSwitch is made by Rozha's Tech. It is not affiliated with, endorsed by, or sponsored by Blackmagic Design.