Go Link - Radio Audio Bridge

Turn your Bluetooth headset into a radio headset! Pair with your phone and a RadioLink cable to bridge your two-way radio instantly — no expensive intercom gear needed.

【Key Features】

🔗 Bluetooth Headset Becomes a Radio Headset
With your phone and a RadioLink cable, bridge your two-way radio directly — no costly intercom equipment required.

📡 Stay Connected Without Cell Service
Mountains, tunnels, remote areas with no signal? Keep your riding group connected without dropping out.

🎙️ PTT — Press to Talk, Safer Riding
Use the physical PTT button on your radio to transmit. Keep both hands on the handlebars and stay focused on the road.

🏍️ Built for Motorcycle Riders
Large buttons, clear display, high-contrast colors visible in sunlight, optimized for left-hand operation.

【Before You Start】

This app is a companion app for the BlueRider RadioLink accessory. Its primary function is to bridge communication between a two-way radio and a Bluetooth headset through your phone.

【Hardware Compatibility & Cable Requirements】

1. Dedicated Cable: This app requires the RadioLink Type-C audio cable to function.
2. Audio Bridging: Your phone must support USB-C audio input/output for the radio bridging feature to work.
3. Important Note: Some phone models with a 3.5mm headphone jack may still not support USB-C audio. Please verify your phone model's compatibility.

【Unlock Bridging】

If you are using a non-BlueRider Bluetooth headset, a one-time purchase is required to unlock the bridging feature.

【System Requirements】

Android 12 or above.

【Accessibility Service (AccessibilityService) Disclosure】

This app uses the Android AccessibilityService API solely for detecting physical PTT (Push-to-Talk) button presses.

Why this service is needed:
To allow your PTT button to work at any time — including when the app is in the background or the screen is off — Go Link uses the AccessibilityService to monitor hardware key events. This is essential for radio communication, letting you transmit instantly by pressing the PTT button.

How this service works:
- Only monitors key events from your designated PTT device
- Starts audio transmission when PTT is pressed; stops when released

This service does NOT:
- Read or collect any screen content
- Record, store, or transmit any user interactions, text input, or personal data
- Modify any user settings or system configurations
- Interact with or control other applications
- Perform remote call recording

You can enable or disable this service at any time via Android Settings > Accessibility > Go Link.

【Radio Transmission Disclaimer】

The GoLink system is provided solely as a communication interface tool. Purchasing or using it does not grant authorization to transmit on radio frequencies.

Users are solely responsible for holding valid licenses issued by the competent authority in their jurisdiction (e.g., amateur radio operator or station licenses). Unauthorized transmissions may result in criminal liability or penalties.

All frequency, power, and modulation settings must comply with local laws. Any illegal interference caused by improper configuration is the user's sole responsibility.

To the maximum extent permitted by law, Dimton CO., LTD. shall not be liable for any damages or penalties arising from the user's violation of applicable laws.