MaterialCalc: Build & Waste

About MaterialCalc: Build & Waste

MaterialCalc is the ultimate professional material estimator and scrap waste calculator designed for general contractors, builders, carpenters, landscapers, painters, and DIY home renovators.

Accurately calculate material requirements, eliminate costly guesswork, and generate instant, itemized Bills of Materials (BOM) for any construction job in seconds.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔥 10 ALL-IN-ONE MATERIAL ESTIMATORS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━

1. 🪵 Flooring & Tile Calculator
• Calculate net room square footage or square meters.
• Input tile dimensions and box pack sizes.
• Computes total tiles, boxes to purchase, and scrap waste buffer.

2. 🎨 Wall Paint & Primer Calculator
• Multi-wall room perimeter & height inputs.
• Automatic cutout deductions for windows, doors, and closets.
• Multi-coat coverage calculations and gallon/liter can requirements.

3. 🏗️ Concrete Slab & Footing Calculator
• Cubic yard and cubic meter volume calculations.
• Instant yield estimation for standard 60lb/80lb and 25kg/40kg pre-mix bags.
• Bulk ready-mix concrete truck load planning.

4. 📐 Drywall & Sheetrock Calculator
• Standard 4×8 and 4×12 drywall sheet estimates.
• Automatic fastener/screw calculations (16" & 24" OC).
• Joint compound (mud) and tape roll requirements.

5. 🏠 Roofing & Shingles Calculator
• Roof pitch multiplier (4/12 to 12/12 slope factors).
• Eave overhang and total roofing squares.
• Shingle bundle counts and 30 lb asphalt felt underlayment rolls.

6. 🔨 Lumber & Wall Framing Calculator
• On-center stud spacing (16" OC & 24" OC).
• Corner post backing studs and T-intersection backing.
• Top and bottom sole plates + 16d framing nail estimates.

7. 🧱 Brick & Masonry Calculator
• Standard modular and metric brick sizing.
• Customizable mortar joints (3/8" or 10mm).
• Single or multi-wythe structural masonry walls and mortar bag counts.

8. 🪨 Gravel, Mulch & Aggregates Calculator
• Driveway and landscaping bed volume.
• Density weight conversions for Crushed Stone, Pea Gravel, Sand, and Mulch in US/Metric Tons.
• Bulk 1-ton super sack requirements.

9. 🪵 Decking & Planks Calculator
• Deck surface runs with plank gap spacing.
• Total linear board footage and stock board purchases.
• Joist layout framing and exterior deck screws count.

10. 🌡️ Batt & Roll Insulation Calculator
• R-Value targets: R-13, R-19, R-30, and R-38 batt packs.
• Multi-zone stud cavity coverage.
• 6-mil polyethylene vapor barrier film roll estimates.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚡ PROFESSIONAL POWER FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━

• 🔄 Dynamic Unit System: Seamlessly toggle between Imperial (feet, inches, sq ft, tons) and Metric (meters, cm, sq m, tonnes) at any time.
• 📊 Interactive Scrap & Waste Slider: Dial in exact scrap buffers from 0% to 25% to prevent running out of materials mid-job.
• 📋 One-Tap BOM Clipboard: Instantly copy formatted Bill of Materials to paste into text messages, supplier emails, or job sheets.
• 💾 Project History: Save estimates locally on your device for fast offline recall.
• 📄 Professional PDF & CSV Export: Generate itemized client estimates and supplier order sheets with one tap.

Stop overpaying at the lumberyard or running out of supplies mid-job. Download MaterialCalc today!