AppPage.net

Screenshots

  • Pocket Tester for KNX screenshot 1
  • Pocket Tester for KNX screenshot 2
  • Pocket Tester for KNX screenshot 3
  • Pocket Tester for KNX screenshot 4
  • Pocket Tester for KNX screenshot 5
  • Pocket Tester for KNX screenshot 6

About Pocket Tester for KNX

Pocket Tester for KNX is a commissioning and handover tool for KNX installers. Connect the phone to the installation's KNXnet/IP interface or router, watch the bus live, test each group address one by one, and leave the customer a PDF report of what passed and what still needs work.

What you need
• A KNXnet/IP interface or router reachable from the phone, usually on the same Wi-Fi or Ethernet network (tunnelling), or an IP router for KNX IP routing (multicast). Without a gateway the app cannot see or reach the bus.
• KNX IP Secure is not supported in this version. A gateway that only accepts secure connections is detected and the app tells you it can't connect; nothing is sent. Encrypted routing traffic can't be read.
• Project files are not imported. Load your group addresses from a CSV file with address, name and data type (any delimiter, columns in any order), such as a group address export from your project software. Without a list the app still works and shows raw addresses.

Connect
• Search the local network for gateways with one tap, or add one by IP address, for example over a VPN. The search only runs when you tap.
• See each gateway's name, individual address, whether it offers tunnelling, routing and IP Secure, and how many tunnels are still available when the gateway reports it.
• Plain messages for common faults: no answer, all tunnels in use, no bus connection, secure-only gateway, programming mode left on.
• The tunnel is released 30 seconds after the app goes to the background, so the gateway's slot is available to others.

Monitor
• Live telegrams with the names and decoded values from your address list, bus activity over the last 10 seconds and an estimated bus load.
• Views for lights, blinds and addresses missing from your list, with a hint about which device sends them, to spot leftover links.
• Tap any telegram to test that address.

Test one address
• A dial matched to the data type: switch, up/down, dimming step, percent, angle, counters, temperature and other 2-byte floats, 4-byte values and scenes.
• Send and Read happen only when you tap. The first Send warns that lights, blinds, sockets or heating can react at once.
• See the status that comes back, from which device, and how long it took.
• Mark Pass, Fail with a reason (no reply, no status, runs the wrong way, wrong device, other) or Skip, then walk on to the next address.

Hand over
• A punch sheet of every address with pass, fail, skip and to-do counts and an estimate of the time left.
• A PDF report for the customer with your company name and logo, the customer name, open points, the full address list and signature lines. Save it where you choose and share it with any app.

Private
• No account, no ads, no analytics. Address lists, verdicts, report details and saved gateways stay on the phone. The app only talks to the gateway or routing group you choose on your network.

KNX is a trademark of KNX Association. Pocket Tester for KNX is an independent app by Akretio SRL and is not made or endorsed by KNX Association.

What’s new

Version 1.1.0 · Updated November 7, 2026

First release.