GSound RTA
Kenzo Thanh Music & Audio
Find mic feedback and the EQ slider to pull. RTA, FFT, main/sub phase tool.
- Downloads
- 39+
- on Google Play
- Price
- Free
- No in-app purchases
- Updated
- Nov 12
- 2026 · v1.1
Screenshots
Save to PinterestAbout GSound RTA
GSound RTA is a sound analyzer for sound engineers and karaoke system owners.
FEEDBACK FINDER
Raise the mic volume slowly and the app catches the frequency that starts to ring, then tells you what to do: "31-band EQ: pull the 2.5k slider down 6 dB. PEQ: 2480 Hz, Q 8–10, cut 6 dB". Every feedback frequency is listed so you can EQ them one by one. It tells feedback apart from fans, mains hum, speech and sung notes, so background noise rarely triggers false alarms.
PHASE: ALIGN MAINS AND SUBS
Just the phone, no audio interface needed. Cable the phone to the mixer: the app plays pink noise through the system and listens with the phone's mic. Measure the main, store it, then measure the sub. The app overlays both traces and tells you how many ms of delay to add to which speaker, and whether to flip polarity.
• Magnitude, phase and coherence on one screen. Where the data is unreliable, the phase trace fades out.
• Store 4 traces (A, B, C, D) to compare. Smoothing from 1/3 to 1/24 octave.
• Finds the system delay for you, fine-tune in 0.1 ms steps.
After adjusting, listen and measure again to confirm.
RTA TAB: THREE VIEWS
• RTA in 1/1, 1/3 (matches a 31-band EQ), 1/6 and 1/12 octave bands with peak hold and a marker on the highest band caught.
• High-resolution FFT up to 32768 points, 4 windows, frequency cursor.
• Spectrogram: feedback shows as a bright horizontal line.
• dB meter with A / C / Z weighting, LAeq, LAmax, clip warning. dB SPL calibration against a reference meter.
• Full-screen graphs and freeze to read values.
SIGNAL GENERATOR
Pink noise, white noise and sine 20 Hz – 20 kHz for system EQ, rattle hunting and subwoofer checks.
MICROPHONE
Picks the least processed input your phone offers and turns off automatic gain / noise suppression. Works with USB measurement mics (miniDSP UMIK-1…) via OTG.
No ads, no account, no internet needed. Audio is processed on the phone only and never recorded. Vietnamese and English.
FEEDBACK FINDER
Raise the mic volume slowly and the app catches the frequency that starts to ring, then tells you what to do: "31-band EQ: pull the 2.5k slider down 6 dB. PEQ: 2480 Hz, Q 8–10, cut 6 dB". Every feedback frequency is listed so you can EQ them one by one. It tells feedback apart from fans, mains hum, speech and sung notes, so background noise rarely triggers false alarms.
PHASE: ALIGN MAINS AND SUBS
Just the phone, no audio interface needed. Cable the phone to the mixer: the app plays pink noise through the system and listens with the phone's mic. Measure the main, store it, then measure the sub. The app overlays both traces and tells you how many ms of delay to add to which speaker, and whether to flip polarity.
• Magnitude, phase and coherence on one screen. Where the data is unreliable, the phase trace fades out.
• Store 4 traces (A, B, C, D) to compare. Smoothing from 1/3 to 1/24 octave.
• Finds the system delay for you, fine-tune in 0.1 ms steps.
After adjusting, listen and measure again to confirm.
RTA TAB: THREE VIEWS
• RTA in 1/1, 1/3 (matches a 31-band EQ), 1/6 and 1/12 octave bands with peak hold and a marker on the highest band caught.
• High-resolution FFT up to 32768 points, 4 windows, frequency cursor.
• Spectrogram: feedback shows as a bright horizontal line.
• dB meter with A / C / Z weighting, LAeq, LAmax, clip warning. dB SPL calibration against a reference meter.
• Full-screen graphs and freeze to read values.
SIGNAL GENERATOR
Pink noise, white noise and sine 20 Hz – 20 kHz for system EQ, rattle hunting and subwoofer checks.
MICROPHONE
Picks the least processed input your phone offers and turns off automatic gain / noise suppression. Works with USB measurement mics (miniDSP UMIK-1…) via OTG.
No ads, no account, no internet needed. Audio is processed on the phone only and never recorded. Vietnamese and English.
What’s new
Version 1.1 · Updated November 12, 2026
• New Phase tab: align mains and subs with just the phone. Cable it to the mixer, measure the main, then the sub, and the app tells you how many ms of delay to add and whether to flip polarity. • RTA, FFT and Spectrogram now share one RTA tab with a view selector. • RTA marks the highest band caught. • Smoother graphs, no more cut-off text.
Alternatives to GSound RTA
Looking for apps like GSound RTA? Here are 6 similar Android apps on Google Play. All of them are free to download.
-
All Document Editor & Reader
-
Tonecraft: EQ Music Player
-
Pocket File Cleanup
-
Universal Remote TV-Cast to TV
-
Local File Share
-
Tidyfold File Manager
| App | Rating | Price | Installs | Last updated | Compare |
|---|---|---|---|---|---|
| GSound RTA | – | Free | 10+ | Nov 12, 2026 | |
| All Document Editor & Reader | – | Free | 1+ | Nov 13, 2026 | Compare |
| Tonecraft: EQ Music Player | – | Free | 10+ | Nov 8, 2026 | Compare |
| Pocket File Cleanup | – | Free | 1+ | Nov 7, 2026 | Compare |
| Universal Remote TV-Cast to TV | – | Free | 5+ | Nov 8, 2026 | Compare |
| Local File Share | – | Free | 5+ | Nov 7, 2026 | Compare |
| Tidyfold File Manager | – | Free | 1+ | Nov 4, 2026 | Compare |
Compare GSound RTA with the top alternatives: ratings, updates, ASO score and keyword gaps →