Omnicomm Config

Omnicomm Config is the field tool for installing and servicing Omnicomm LLS fuel level sensors from an Android phone or tablet.

CONNECT BY CABLE
• Plug the sensor in through a USB OTG cable and an RS-485/USB adapter. The app finds it on its own and tries the last baud rate first. No Connect button, no setup.
• Live fuel level, raw scale (0–4095), CNT and temperature, with a stability indicator.

CALIBRATE
• Store the Empty and Full marks. The app refuses an unstable reading.
• Build a tank calibration table step by step while filling the tank.
• Tank calibration from refuellings: build a table from 1–4 refuellings (level before, level after, litres on the receipt). No draining, no flow meter. Works offline, without a sensor attached.

CONFIGURE AND SERVICE
• Network address, baud rate, protocol and output settings.
• Filtering profiles.
• Sensor information, event log, restart, firmware update and factory reset.

Made for installers: large controls, 5 languages (English, Vietnamese, Russian, Spanish, Portuguese), no account, no ads and no data collection.

Sensor features need an Omnicomm LLS sensor and a USB OTG cable with an RS-485/USB adapter. Tank calibration from refuellings works without hardware.