MapRuler for paper map

Mapruler is application to measure the distance of a map in the trip magazines. ※ Attention: I cannot guarantee the accuracy of the scales. ■ How to use: ・ You set a scale and put iPhone on a map.(Step1) ・ When you drag a scale, a light blue indicator will be displayed. ・ You drag it to the position that you want to measure.(Step2) ・ The measured value are displayed with the "distance" "travel time". ※ When the time required is within one minute, it is displayed with one minute. ・ You can choose speed among 3km/h, 4km/h, 5km/h. ・ The measured value are added when you tap the button "add". The result is displayed by a total value.(Step3) ・ When you tap a "reset" button, measured value, an indicator are reset. ・ You can lock a reduced scale with a switch. Sorry, an advertisement is displayed during unlocking. ・ When you finish application, a total value, measurements, the indicator are reset. ■ Reduced scale setting method ・ The choice of the reduced scale with the picker. 　　Please choose the reduced scale that you want to set among a picker. ・ Input of the reduced scale denominator 　You tap an "input" button. and you tap “scale" button. 　You input a reduced scale denominator, and you tap "Done" button. 　A scale is displayed in a locked state. ・ Input of the distance 　You tap an "input" button. and you tap “distance" button. 　You input distance (m) for 1cm in the map, and you tap "Done" button. 　A scale is displayed in a locked state. ■ Specification of Mapruler - reduced scale setting range 1:100〜1:200,000 - Maximum total value 999km - Indication of the distance under 100m unit of distance:m(one decimal places) over 100m〜under 1000m unit of distance:m over 1000m unit of distance:km(three decimal places)