Drainly: Speaker Cleaner

Muffled speaker after a splash, rain, or a sweaty workout? Drainly plays tuned sound waves and vibration to help push water and dust out of your iPhone speaker grille. One tap, no menus. ▶ HOW IT WORKS Drainly plays low-frequency tones that make the speaker cone move and vibrate. This motion may help move trapped water droplets and loosen dust and lint from the grille. Results vary depending on how much water or debris is in the speaker and on the condition of your device. ▶ FEATURES - Quick Eject (free): a one-tap, 30-second cycle using low-frequency tones (165–220 Hz). No signup, no paywall. - Dust Mode: short alternating bursts to help loosen pocket lint and debris. - AirPods & Earbuds Mode: tone cycles tuned for wireless earbuds. - Sound Check & dB Meter: play a test tone and measure levels before and after cleaning to see if your audio improved. - Tone Generator: choose any frequency from 50 Hz to 20,000 Hz. - Control Center, Action Button & Widget: start a cleaning cycle in seconds without opening the app. ▶ 3 STEPS 1. Disconnect Bluetooth headphones and cables. 2. Turn the volume up and hold the phone with the speaker facing down. 3. Tap Quick Eject and let the cycle run. Repeat if needed. ▶ DRAINLY PRO Unlock Deep Clean sweeps, Dust Mode, AirPods Mode, the dB Meter, and the Tone Generator. Quick Eject stays free. ▶ IMPORTANT Drainly uses sound and vibration and cannot repair physical or internal water damage. If your device was submerged, powered off, or is not working, follow Apple's guidance and contact Apple Support. Do not use heat, rice, or compressed air. Terms of Use: https://drainly.meticha.com/terms Privacy Policy: https://drainly.meticha.com/privacy