xploview USB

View, photograph and record through a supported USB microscope. A compatible USB-C iPad and microscope are required. VIEW AND CAPTURE See the live microscope picture, choose an available resolution, and rotate or mirror the view. Take photos and record video without microphone audio. Compare a saved photo with the live picture while your microscope is connected. FOLLOW CHANGES Timed capture takes photos at the rate and duration you choose. Auto capture takes photos when the picture changes, with adjustable sensitivity and a wait between photos. Each run has its own folder. Keep the app open while a capture run is active. MEASURE A CALIBRATED IMAGE Freeze the picture or open a saved photo, calibrate against a known distance, then add line, angle and area measurements. Use a calibration for the current image without naming it. When calibrating a frozen live view, you can optionally save a named calibration for explicit reuse with the same optical setup. Save an annotated copy while keeping the original. Short tutorials explain camera angle, height and focus, and matching ruler edges. COMBINE FOCUS FRAMES Keep the subject still and slowly turn the microscope's focus knob. Stack captures frames as focus changes and combines them into a picture. You can also choose to keep the source frames. KEEP AND SHARE YOUR WORK Browse captures in the app and access saved files through Files. Share selected photos and videos using the iPad share sheet. No account or registration is required. The app processes your work locally and does not automatically upload captures to Sunpet; sharing and device backups follow the services and settings you choose. Requires a USB-C iPad with iPadOS 17 or later and a supported USB microscope. For general observation, education and inspection. Not intended for medical or veterinary diagnosis, treatment, patient monitoring or safety-critical use. Calibrate carefully and independently check results before relying on them.