R53 Dash by O’Gwedy

R53 Dash turns your iPhone into an OBD dashboard designed for the MINI R53 Cooper S and JCW. Connect an OBDLink CX or MX+ and view essential engine information in landscape: - intake pressure and calculated relative boost; - engine RPM; - coolant and intake-air temperatures; - short- and long-term fuel trims; - calculated load and throttle position; - ignition timing and voltage; - MIL status, OBD checks, oxygen sensors and trouble codes; - stored, pending and permanent codes when reported by the vehicle; - General, Boost and Mixture CSV recording profiles; - mandatory PDF backup before clearing trouble codes; - indicative 0–100 km/h, 0–60 mph or 0–62 mph timer; - French/English interface and metric/imperial units; - Simulation mode for exploring the interface without a vehicle. Files stay under your control and are exported using standard iOS features. R53 Dash requires no account, contains no advertising and collects no data. COMPATIBILITY Designed for iPhone running iOS 17 or later, MINI R53 Cooper S/JCW, and OBDLink CX or MX+ adapters. The CX is fully tested; MX+ pairing and connection were validated on physical hardware. Available values depend on the vehicle ECU and configuration. SAFETY Never operate the iPhone while driving. Acceleration testing must be performed only on a track or closed private ground. Displayed information is indicative and does not replace inspection, diagnosis or repair by a qualified professional. R53 Dash by O’Gwedy is an independent project and is not affiliated with, endorsed by or sponsored by BMW AG, MINI, OBD Solutions or OBDLink. Mentioned trademarks belong to their respective owners.