PyroSafety

PyroSafety is the field-use tablet platform for everyone responsible for the safety of an outdoor pyrotechnic display — Fire Marshals, AHJ inspectors, display operators (pyrotechnicians), display companies, and on-site crew. Built by inspectors for the industry, PyroSafety walks every role through the regulatory steps required for a Go / No-Go decision — site survey, shell inventory, mortar configuration, safety distances, firing-method verification, crew qualifications, and the full NFPA 1123 / NFPA 1124 / NFPA 1126 compliance checklist — all from a single tablet, with PDF reports generated on-site. ROLES (selected at sign-in): • AHJ Inspector — available now. Pre-show inspection workflow, regulatory checklist, PASS / FAIL / N/A decisions, and final inspection PDF report with inspector signature. • Display Operator (Pyrotechnician) — coming. Show setup, mortar configuration, firing-panel records, and operator-side documentation. • Display Company Admin — coming. Multi-show coordination, crew assignments, and inventory. • Crew / Shooter — coming. Pre-show briefings, role assignments, and pre-fire checklist. THREE INSPECTION TYPES SUPPORTED TODAY: • Display Outdoor Aerial — Land. Standard NFPA 1123 land-based aerial display with 1.3G shells, full audience-distance enforcement, and equipment-spacing validation. • Display on Barge / Floating Platform. Manned barge displays with USCG marking requirements, the reduced barge safety-distance formula, and the included NFPA 1123 Barge Layout Formula Calculator (fillable PDF). • Display Outdoor — Consumer (UN0336) & Professional Use Only (UN0431). 1.4G consumer-grade and Pro Use Only / Articles Pyrotechnic displays with a four-band operational wind rule set developed specifically for these display classes. KEY CAPABILITIES: • Step-by-step 6-screen inspection workflow with auto-save • 15-section regulatory checklist with PASS / FAIL / N/A / NOTE per item • Type-aware logic — irrelevant items hide automatically (e.g., 1/3 offset checkboxes hide for Consumer / Pro Use Only) • Inspection-type-aware wind bands with auto-locked Next button at STOP / HOLD threshold • Type-specific firing-method restrictions (Hand Fire Reload disabled for Barge, Pre-Loaded disabled for Consumer / Pro) • Auto-calculated minimum NFPA distances; supports AHJ-approved 1/3 offset for Aerial / Barge • Local AHJ jurisdiction items — customize the checklist for your jurisdiction's local code requirements • Review mode with pin-comment system for pre-inspection rehearsals and QA audits • Final PDF inspection report with inspector signature, generated on-device • Resources screen with federal regulation portals (USCG, FAA, USDOT / FMCSA, PHMSA) and inspection tools DESIGNED FOR PROFESSIONAL USE: PyroSafety is for licensed Fire Marshals, AHJ inspectors, and pyrotechnic display professionals. It is not a consumer fireworks safety app. Use of this application requires familiarity with NFPA 1123, NFPA 1124, NFPA 1126, applicable state statutes, and your local AHJ regulations. ABOUT AMERISAFETY, LLC: AmeriSafety is a New Hampshire-based fire-safety consultancy founded by veteran fire marshal and pyrotechnic inspector Stephen Pelkey. PyroSafety is built by AHJ inspectors for the entire pyrotechnic display industry, with the technical implementation provided by Weboconnect. For volume licensing, demos for state Fire Marshal offices, or technical support, contact: [email protected]. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://pyrosafety.app/privacy/