Tree Height Meter

How tall is that tree? Tree Height Meter turns your phone into a digital clinometer and estimates the height of any tree, utility pole, flagpole or building — no tape to the top, no special gear, just your phone and a little trigonometry. Stand back a known distance, sight the top and the base of your target, and the app combines the elevation angles with the distance to show an estimated height in metres or feet. TWO MEASURING METHODS • Two-point method — sight both the TOP and the BASE from one spot and enter the horizontal distance. Works even on sloping ground, because the base angle correctly adds its share. • Eye-height method — when the base sits level with your feet, sight only the TOP and add your own eye height. Faster, for flat ground. WHAT YOU GET • A live elevation-angle readout as you tilt the phone • Capture top and base with a tap • Zero-at-horizon calibration for a clean reading • Metres or feet, your choice • A Methods reference and a step-by-step Guide built in WHO IT'S FOR Foresters and arborists, surveyors and landscapers, tree-care crews, students learning trigonometry, and anyone curious how tall the tree in the yard really is. A NOTE ON ACCURACY The height is an estimate. Accuracy depends on a correct distance, a steady phone and a clear line of sight to the top and base — zero on a level horizon first. For estimation only; verify critical measurements with a calibrated instrument. MORE THAN TREES • Distance — sight the top of something whose height you know (a door, a pole, a building) and read how far away it is. • Area — enter the sides of a rectangle or a four-sided plot and get m², ft², acres or hectares. No tape? The pace helper turns your steps into metres. • Timber — estimate standing-tree volume from height and DBH, plus log yield in board feet by the Doyle, Scribner and International ¼-inch rules. Tree height carries over from your last saved measurement. HOW TO AIM Hold the phone upright, look across its top edge and tilt the back of the phone up toward the treetop. Looking up reads positive, looking down reads negative, and a light tap confirms each capture. Every height is saved to your history, where you can export a CSV or build a summary report.