Electrician Field Kit: NEC

Bend conduit. Run NEC calculations. Enter field measurements without fighting your phone’s keyboard. Electrician Field Kit puts the tools electricians reach for most in one place. Plan bends with visual marks, work through eight electrical calculators, and use a field-ready keypad built for measurements. Core tools and reference material work offline. CONDUIT BENDING • Plan 90° bends, offsets, rolling offsets, back-to-back bends, kicks, 3- and 4-bend saddles, and segment bends • Follow visual diagrams and mark-by-mark distances • Choose supported EMT, IMC, and rigid sizes, or create a custom bender profile • Use built-in profiles with take-up and shoe-radius data for select Greenlee and Klein models • Read imperial results as decimals or tape-friendly fractions, with 1/16" and 1/32" options • Check bend angles with the built-in digital level NEC CALCULATORS Run voltage drop, wire size, conduit fill, box fill, motor FLA, Ohm’s law, EGC sizing, and ampacity derating calculations. Review the calculation steps and relevant NEC references, and switch between NEC 2020 and 2023. MADE FOR FIELD INPUT The custom keypad puts common fractions, number adjustments, and field switching close at hand. Choose a left- or right-hand layout, or switch to wheel input when that suits the task. MORE TOOLS WHEN YOU NEED THEM Look up common NEC tables, wire colors, NEMA configurations, and formulas. You can also build panel schedules, record field tests, organize work by job, and create PDF reports. Get started free with daily bends and calculations. Optional Pro plans unlock higher limits, enhanced reporting, and iCloud sync. Available plans and prices are shown in the app. Electrician Field Kit is a calculation and reference aid. Verify results against the NEC edition adopted in your jurisdiction, manufacturer specifications, and the requirements of the authority having jurisdiction.