AquaPop - Eject Water

AquaPop is a sonic cleaning toolkit for your phone speaker. If your phone got wet, sounds muffled, or has dust buildup — let sound waves do the work. 3 CLEANING MODES • Water Eject — 165Hz low-frequency pulses push trapped water out of the speaker driver • Dust Remove — High-frequency sweep from 500Hz to 8kHz peels fine particles • Deep Clean — 6-stage combined routine: warm up, impact, high-freq, finish PRO TOOLS INCLUDED • Speaker Test — Independent left/right channel check to locate faults • Decibel Meter — Real-time ambient noise with max/avg/min statistics • Tone Generator — Full 20Hz–20kHz pure tones with common presets HOW TO USE 1. Turn volume to maximum 2. Place speaker facing down so water can drip out 3. Tap a mode and let AquaPop do the rest 4. Run 2–3 cycles for best results TIPS • Works best for light water exposure; severe liquid damage needs professional service • Keep the phone on a soft surface to minimize vibration noise • Use with case off for direct sound path PRIVACY FIRST AquaPop runs fully offline. No data collection. No sign-in. No ads. The microphone permission is only used by the built-in decibel meter and nothing is recorded or uploaded. SUBSCRIPTION INFO • Payment will be charged to your Apple ID account at confirmation of purchase. • Subscription automatically renews unless auto-renew is turned off at least 24 hours before the end of the current period. • Your account will be charged for renewal within 24 hours prior to the end of the current period. • You can manage and cancel your subscriptions by going to App Store → Account → Subscriptions. Privacy Policy: https://frexx.top/aquapop/privacy.html Terms of Use: https://frexx.top/aquapop/terms.html SUPPORT Questions or feedback? Reach us at [email protected]