BendPro: Conduit Bending

Marks on the stick. Bend it once. Pick your bender, type the rise or the stub, and BendPro tells you where to mark, which shoe mark to line up with and which way the hook faces. You see the bend in 3D before you touch the conduit. • 90° stubs, back-to-back 90s, offsets and kicks • 3-point and 4-point saddles • Parallel offsets for a rack, evenly spaced • Rolling offsets and segment bends • A run builder: several bends on one stick, and where to cut • Every mark on a real tape measure, in bend order • Step by step with the bender on screen: slide, line up, bend, roll • Full size in AR, on the floor or a wall • A level to check the angle with your phone • Inches to 1/32″ or metric, works with no signal YOUR BENDER, ITS REAL NUMBERS Hand benders from Klein, Greenlee, Ideal, Milwaukee, Gardner Bender and Southwire, plus Greenlee mechanical, electric and hydraulic machines. Take-up and radius come from the makers' own charts wherever they publish them, and every number says where it's from. Not listed? Bend a Test 90 and BendPro measures yours.