I&C Pro-Instrument Tools

About I&C Pro-Instrument Tools

I&C Pro 2.5 — built from real field experience. DP ⇌ SCALE Converter — steam density compensation built in Enter just the Scale Range, CALIB DP and measured value of a differential-pressure (DP) flow element to check instrument health instantly. Add the field-measured pressure and temperature, and the app computes the density-compensated flow automatically, based on IAPWS-IF97 steam tables. Set the design condition (Reference) once, and you can verify the reading the same way the DCS compensation logic does. Selectable pressure units — bar(g) / bar(a) / MPa / psi / kPa. Gas Unit Converter — per-country emission standards, auto-applied Pick a country and its standard reference condition (temperature, reference O2) is filled in automatically. Supported: Vietnam, Korea, EU, USA, China, Brazil, India, Russia, ISO. Reference O2 is distinguished by fuel (coal / gas / oil) — e.g. 15% for gas turbines, 6% for coal. Result unit switches automatically between mg/Nm3 and mg/m3 depending on the standard temperature. The governing regulation and cautions for comparing against CEMS are shown on a detail page. Percentage Calculator — change-rate mode added Enter an old value (A) and a new value (B) to get the increase/decrease rate directly — handy for emission-reduction calculations and more. Other improvements Icon and UI cleanup, and expanded translations across 9 languages. A commissioning tool for instrumentation & control engineers, ready to use right in the field — and always improving. Feedback is always welcome.

App privacy

The developer, I&C Pro, reported these privacy practices to Apple.