RA660 mission control

RA660 Navi Mission Control The RA660 Mission Control app connects your RA660 Navi XL to your device. Get full control over the cleaning process and additional equipment, such as the Cleanfix Charging Assistant, no matter where you are. Keep all your cleaning records stored in one place. The RA660 Navi XL sends all important information about its cleaning missions directly to your device, and this data can be exported as PDF reports. Cleaned zones can be displayed on a map and filtered by defined name, date or location. Notifications such as completed missions are sent directly to your device and displayed as push messages (if enabled). Command your robot Start, pause, stop, and plan your cleaning tasks directly from your mobile device via the Mission Control app. Send the robot back to its charging station and start the charging process with the optional Cleanfix Charging Assistant at the touch of a button. Choose between autonomous and manual cleaning modes. Autonomous mode, combined with the docking station, lets you refill water and charge the battery fully automatically. The charging and refilling cycles run simultaneously in a safe, streamlined process. It is also possible to monitor the recharging process with live data in the RA660 Navi Mission Control app. Simple setup and connection Monitor all the RA660 Navi XL, RA660 Navi XL Gen 2, and RA660 Navi M robots connected to your Cleanfix account from the same app. The availability of some of the described features depends on the connected robot models and license types.