Speaker Cleaner - Water Eject

Water in your speaker? Muffled calls, crackling music, quiet videos? Speaker Cleaner - Water Eject is a water ejector and speaker cleaner that uses sound waves and vibration to help push water and dust out of your phone speaker, so clear sound comes back fast.

Every tool is free. No subscription, no paywall, no locked "Pro" features.

💧 Water Eject in one tap
Tap once and Water Eject runs a guided cleaning cycle of about 60 seconds. It uses a 165 Hz tone, the frequency widely used to eject water from speakers, plus sweeping tones that shake droplets loose. Hold the speaker facing down and watch the water come out. A simple way to get water out of your phone speaker after rain, a splash, the shower or a day at the pool.

🧹 5 cleaning modes
• Water Eject: fast sound-wave cycle to remove water from the speaker
• Deep Clean: a longer cycle that adds vibration for stubborn water
• Dust Clean: a dust remover that uses sweeping tones to loosen dust and lint from the speaker grille
• Blow to Clean: airflow-style gusts for a quick daily clean
• Auto Clean: one tap runs every mode in turn

⚙️ Clean it your way
Choose what to clean: the loudspeaker, the earpiece or your headphones. Set the water level and cleaning strength, and turn vibration on or off. Manual Mode lets you pick any frequency from 50 Hz to 2000 Hz.

📞 Earpiece Clean
Can't hear people on calls? Earpiece Clean is a quick speaker fix: it plays the cleaning tones through the top call speaker, not just the bottom loudspeaker.

📊 Sound Check: see the difference
Sound Check measures your speaker's loudness with the microphone before and after cleaning, so you get a real number instead of a guess.

🔊 Volume Booster
Make your speaker louder for music, videos, games and calls. The booster adds extra loudness on top of your system volume, with a clear warning at high levels.

🎧 Stereo speaker test
Run a quick sound test on the left and right channels to check that both speakers work.

📈 Sound Meter (decibel meter)
Measure the noise around you in dB in real time, with minimum, average and maximum readings.

📅 7-Day Care routine
One short clean a day keeps the speaker grille clear. Turn on an optional daily reminder at the time you choose.

💙 Why people choose Speaker Cleaner
✔ 100% free: every feature unlocked, no subscription, no trial
✔ Ads never stop a cleaning cycle halfway
✔ Headphone safety: speaker cleaning won't play into your earbuds by mistake
✔ Private: the microphone is used only for Sound Meter and Sound Check. Audio is measured on your phone and is never recorded or uploaded.
✔ Honest: the app tells you what sound cleaning can and can't do
✔ 11 languages, light and dark themes
✔ Friendly guide: Blip, our mascot, shows you what to do at every step

📋 How to use the water ejector
1. Remove the phone case and turn the volume to maximum.
2. Hold the phone with the speaker facing down.
3. Tap Water Eject and let the cycle finish.
4. Run Sound Check or the Stereo Test to hear the result. Repeat if the sound is still muffled.

ℹ️ Good to know
Speaker Cleaner uses sound and vibration only. It helps with small amounts of water and light dust in the speaker grille. It cannot repair water damage inside the phone. If your phone was fully submerged, switch it off, let it dry and contact the manufacturer or a repair shop. Cleaning tones are loud, so keep the phone away from your ears while it runs.

Download Speaker Cleaner - Water Eject, the free speaker cleaner and water remover, clean your speaker and get loud, clear sound back in about a minute.

Questions or ideas? Write to [email protected]. We read every message.