PL OpenSpace Pro Mobile

Whether you want to monitor or configure your parking device, the PL OpenSpace Pro Mobile App makes it easier than ever for you. The app home screen displays the Bluetooth connection mode, the MAC Address, and the connection status. If you're pairing the device for the first time, tap the select port button to scan for devices. For your subsequent connections, you can just select from the list of paired devices. Tap the connect button to access parking updates.

General
The app screen displays the following when connected:
— Preset location,
— Number of levels,
— Individual Parking level, Spaces mode, Total spaces, Parking display, and Status of each level,
— Press and hold on a particular parking level to configure the following:
• Set the total spaces and free spaces,
• Set the Display to: On or Off, by tapping the radio button,
• Set the Status to: Open or Closed, by tapping the radio button,
• Set the Parking Display to: On or Off, by tapping the radio button,
— Displays the connection mode and the MAC Address,
— Displays Connected and lets you disconnect by tapping the Disconnect button.

Schedule
You can configure the minimum number of free spaces, schedule messages, and adjust the free spaces for
each parking level. The app enables you to configure and set the open hours and the offset hours for each
parking level.

Hardware
Lists all controllers and sensors, and enables you to reset them.

App settings
You can set the Spaces Mode by selecting either Free spaces or Cars IN.

System monitor
Displays the real-time status of specific components of the system such as controllers and sensors. The
app also represents the graphical view of the vehicle detection data, the magnetometer values, and the list
of commands that can be sent to the controller or the sensor.