ZenAir: ESP8266, ESP32 control

ZenAir is a tool for communication with microcontrollers (Arduino or ESP in particular), websites/servers or other devices with IP via WiFi or Bluetooth, when there is a corresponding module.

Provides the user with a friendly interface and the ability to configure every aspect of the connection policy and data acquisition display.

Advantages of app:
- No Ads
- Fully configurable and compact interface
- Really beautiful

All previously entered devices are on the screen called terminals. Each terminal has connection and disconnection buttons by default. Other elements are optional.

History - records an actions related to the interaction between devices. It is possible to remember data that was sent by user and/or received from device. The size of the history is determined in the settings with maximum of 9999 lines.

Slider - supports joystick mode, automatically sends 0 (with prefix if it exist) at the end of usage. It is possible to set any prefixes. Minimum -2^31, maximum 2^31 - 1. The count of sliders is limited to 9.

Button - it is possible to send commands as long/complex as possible. Pressable mode with configurable sending rate is supported. Auto-clicker is supported like click at a certain interval (at least every 15 minutes) or once a day at a certain time, this is an experimental function that does not have to work as it should. The number of buttons is limited to 16.

Input field - just a single line field. By default, all data is sent with the ";" terminator.

Console - all incoming data is displayed here, data can be stacked. Maximum size is 9999 lines.