Instrument Tools

Instrument Tools is a "field bag" that combines practical calibration and verification modules for process instrumentation in one application. It works offline, is ad-free, and facilitates rapid decision-making in the field.

Featured Modules

Tx & DCS Range Calculator: Engineering units ↔ 4–20 mA ↔ %range conversions, linear/reverse direction, offset/scale.

Level Calibrations: Calculations with density, geometry, and echo parameters for displacers and radars.

Flow Rate: Mass and volumetric flow rates; summary auxiliary calculations for orifices/nozzles.

pH Electrode (2/3 points): Slope (mV/pH), offset, and temperature compensation (Nernst) with buffer 4/7/10.

Load Cell (mV/V): Multi-point fit, FSO/RO, corner (A-B-C-D) analysis, creep calculations.

Speed/Tacho PPR Verification: Pulse counting with gate time, frequency/period method, RPM scale factor.

Manometer – Deadweight: Reference table with piston area, mass, local g, and lift corrections.

Analyzer tools: Multi-module structure on a single page (updated).

Why Instrument Tools?

Field-ready: Clear interface, adaptability to small screens, unit hints, and sample placeholders.

Accuracy-focused: Uncertainty/scale factor outputs and self-explanatory report texts in many modules.

Offline: Calculations without internet access.

Privacy: No personal data collection, no advertising.

Uses: Maintenance and calibration teams, commissioning, process engineering, quality, and training.

Disclaimer
Results are for engineering purposes only; consult instrument manufacturer instructions and accredited reference standards for final approval.