32 Milim: Cabinet Calculator

32 Milim is a calculation assistant for shops building frameless, 32 mm system cabinets. Give it a carcass size and a face layout and it returns door and drawer front sizes, drawer box cut sizes, a boring pattern and a part list.

WHAT IT WORKS OUT

• Door and drawer front sizes, with inner and outer reveals set separately
• Drawer box: bottom and back cut sizes for the runner system you pick
• Hinge count, from the door's weight, height and width
• Boring pattern: the 32 mm system holes, hinge cups and runner holes
• A part list and a PDF you can share

HOW IT WORKS

Every size is exact millimetres. 235.3333 is the real answer to a three-way split, and the app will not round it away on its own; switch to 0.5 mm steps in Settings if that is what your shop reads.

An impossible layout is never silently corrected. You see the number and the warning together, because a size that was quietly fixed is a panel cut wrong at the saw.

Every hardware value carries its source. A value not yet checked against a manufacturer page is marked "to verify" instead of pretending to be confirmed.

OFFLINE

Your jobs live on your device and the app works with no connection at all. It does the same arithmetic on a phone with one bar in a workshop.

FREE AND PRO

The free version keeps three jobs, never limits a calculation, and shows ads. Pro adds unlimited jobs, server backup, sync across your devices and no ads, monthly or yearly. Change phones and your jobs come with you.

32 Milim gives you the sizes; the cutting is yours. Check the numbers yourself before they reach the saw.