DiagBimmer: BMW & Mini Tools

DiagBimmer is a professional-grade OBD2 scanner and diagnostic app for BMW and MINI vehicles, built for independent technicians, enthusiasts and workshop mechanics outside the dealer network.

★ FREE FEATURES

• Vehicle identification: VIN and chassis code (F30, G20, etc.)
• Trouble code (DTC) reading: stored and active, described in English, Turkish and Spanish
• Full-vehicle scan: all modules, non-responders listed separately
• Clear trouble codes: bulk clear across the scanned modules
• Live telemetry: RPM, speed, coolant/intake temps, battery voltage, MAF, engine load, gear
• Monitors: battery monitor, service display (oil/brakes/inspection)
• HV battery (EV/PHEV): charge, health, cell balance, HV power — on models with verified data
• Special Functions: DME tuning-protection (lock) status
• Advanced live data: model-specific signals; model suggested from the VIN
• Adapter auto-discovery over BLE, Bluetooth, Wi-Fi, USB and ENET

★ PREMIUM FEATURES (ONE-TIME PURCHASE)

• Freeze-frame: the sensor snapshot stored with each fault
• Service reset: oil, brake fluid, vehicle check
• Battery registration after a new battery
• Lamp short-circuit reset: front and rear lighting modules
• Body short-circuit reset: tailgate and KL15/KL30 supply (both: F-series FEM/REM or BDC)
• Forced DPF regeneration on the diesel engine module
• Transmission: ZF 8HP clutch adaptation read/reset, oil service
• Parking brake service mode: retract the rear caliper pistons for a pad change, then the installation check
• Exhaust flap control — M and M-Performance
• Active Sound Design (ASD) on/off
• M burble coding: turn the burble on or off on S55 engines
• Hex Terminal: raw UDS telegrams (ENET adapter; HSFZ gateway, F-series and early G)
• Export: DTC reports as PDF or text, telemetry sessions to CSV

★ COMPATIBLE VEHICLES

BMW 1, 2, 3, 4, 5, 6, 7 Series (F-series 2010+ and G-series 2018+), X1-X7 models, M-Performance and M-series, MINI Cooper F-series; BMW i and plug-in hybrids for the HV battery page.

Note: E-series (1999-2014) is not supported — the app requires UDS.

★ ADAPTER REQUIREMENTS

BLE, Bluetooth Classic, Wi-Fi, USB and ENET (Ethernet) OBD-II adapters are supported — ELM327 v1.5+ compatible. A real car needs an adapter; the demo vehicles do not.

★ SAFETY & LIABILITY

DiagBimmer must not be operated while the vehicle is in motion. Service actions run with the vehicle stationary, parking brake applied and the transmission in Park or Neutral.

Parking brake service mode is the exception: it releases the brake so the pads can come out — chock the vehicle first; the app warns while the brake stays disabled.

Every write asks for confirmation first, except ones that restore a factory setting, stop a running routine or repeat an approved step.

Expert-level tools write to vehicle modules — forced DPF regeneration, parking brake service mode, coding writes and the Hex Terminal. They are for technicians who understand the commands they send; damage from improper use is the user's responsibility (Terms of Use).

DiagBimmer is independent of BMW AG, BMW dealerships, and any authorized service center.

★ BUSINESS MODEL — NO SUBSCRIPTIONS

DTC reading and clearing, live data, monitors and VIN are free. Everything else unlocks with ONE purchase (lifetime IAP). No subscriptions, no ads, no trackers.

Try before you buy: four built-in demo vehicles run on your device — no adapter, no car. While a demo is connected the paid features are unlocked so you see what you would buy; they lock again when you leave. PDF reports, CSV export and Hex Terminal sending always need the purchase.

★ PRIVACY FIRST

DiagBimmer sends no data to remote servers: your VIN, trouble codes, telemetry and all diagnostic data stay on your device. Google Play processes the IAP receipt for purchase verification only. No crash reporting or analytics SDK.

Privacy Policy: diagbimmer.com/en/privacy
Terms of Use: diagbimmer.com/en/terms
Support & privacy contact: [email protected]