Drilling detail
When drilling a part, recalculation of feed: mm / min, mm / rev, mm / cutting edge.
Input:
1) Selectable feed in the dropdown list:
mm / min,
mm / rev,
mm / cutting edges.
2) Optional:
revolutions (rpm)
cutting speed (m / min).
3) Number of cutting edges.
4) Tool diameter (mm).
5) Depth of processing.
6) Number of holes.
The calculation depends on the input:
input feed (mm / cutting edge) calculation feed (mm / min) and (mm / rev),
input feed (mm / rev) calculation feed (mm / min) and (mm / cutting edge),
input feed (mm / min) calculation feed (mm / cutting edge) and (mm / rev),
input speed (rpm) calculation cutting speed (m / min),
input cutting speed (m / min) calculation of revolutions (rpm),
The processing time of the part is calculated.