INI OFFICIAL LIGHT STICK

[Information on main functions]

1. Concert mode
By linking the penlight and seat information, you can enjoy various stage productions of the penlight during the concert. This menu can only be used during a concert.


2. Bluetooth connection
Press and hold the penlight button for 3 seconds to switch to "Bluetooth mode".

If you turn on the "Bluetoot mode" of your smartphone and bring the penlight closer, the penlight and smartphone will work together.
On some smartphones, the Bluetooth function cannot be used unless the GPS function is turned on.
If you cannot connect via Bluetooth, turn on the GPS function of your smartphone.


3. Self mode
After turning on the "Bluetooth mode" of the penlight and smartphone, select the desired color on the smartphone screen to change the color of the penlight.

4. Check the battery level
You can check the battery level of the penlight by tapping the "Check battery status" button at the bottom of the screen in the "Self mode" state. Check if the battery needs to be replaced.

* The displayed remaining capacity may differ from the actual remaining capacity depending on the battery performance and smartphone model.


[Notes before viewing the concert]

– Before the concert starts, please check the seat information written on your ticket, enter the seat information in the penlight, and then pair.
– To liven up the stage performance, press and hold the button of the penlight with registered seat information for 3 seconds at the start of the concert to switch to "concert mode".

– If the penlight does not work properly, the penlight may not have been paired. Complete the penlight pairing in the application.
– Be sure to watch the concert in the seat registered with the penlight. Please note that moving seats may affect the stage performance of the penlight.
– Check the battery level beforehand so that the penlight will not turn off during the concert.
– We are planning to operate a "Remote Control Penlight Support Center" at the concert venue.