Lee Rembert
Follow the instructions in the app, plug everything in and then prepare to wait an hour plus. You will receive an email when the booster is registered and then another when it is activated. I had to open a few ports on my router per the instructions on the website under troubleshooting, but it works without an issue now even right next to my router. Don't rush it, it takes a while to connect on the AT&T side.
85 people found this review helpful
J C
- Flag inappropriate
- Show review history
Solution. Cell booster just would not connect. Day after day after day. After experimentation.....my cell booster runs through a tp-link wifi extender for my ATT pace router. I turned "off" DHCP or is it DCHP, whatever, anyways in under 20 seconds boom. Works. No issues. App still useless. It does not connect nor read status lights. But I can see the device. So I'll delete the app.
27 people found this review helpful
Glen Brooks
- Flag inappropriate
- Show review history
While I initially had difficulty setting my AT&T microcell up, caused by the QR code not calling up the serial number accurately, it was missing the last digit. Once I fixed it by adding the last digit which was written on a white label on the back of the microcell, the process worked fine through the app. The registration process to a few minutes and after about 5 minutes I have to unplug my unit wait 10 seconds and plug it back in. Worked well after that
4 people found this review helpful