Free website generator for mobile apps; privacy policy, app-ads.txt support and more... AppPage.net

About Cubroid Manager

Cubroid Manager

# Firmware Update

1. Turn on just one of the blocks you want to update at a time.
2. Touch the 'Firmware Update' button.
3. Do not turn off the Block and the Manager app.
It is normal for the LED light on the block to turn on and off during the update process.
When the update is complete, the block will briefly disconnect and reconnect again.
4. Your firmware is up-to-date!
Turn off your block and turn on the other block to update their firmware.

# Group number registration

1.Group number setting is not required when using only 1 set of coding blocks. So, the
group number can be set to the default value, 0.
2.When using more than 1 set of coding blocks, set the group number ranging from
0001 to 9999.
3.When using the Coding Cubroid 2 or Coding Cubroid 3 app, enter the same group
number of your coding blocks for a successful connection with your Bluetooth.

Similar Apps

Artibo Manager

0.0

ARTIBO! Your Codable AI Robot!★ ARTIBO Setting Guidehttps://drive.google.com/open?id=1i1sYcBORjB6Yxvk5wN4qlNJbiPHjhuqg...

Advanced Cubroid

0.0

# Cubroid, The easiest coding block in the world!Introducing Cubroid, the world’s...

Coding Cubroid 3

0.0

# Cubroid, The easiest coding block in the world!Children can experience STEAM...

Coding Cubroid 2

0.0

# Cubroid, The easiest coding block in the world!Children can experience STEAM...

Frequently Asked Questions(FAQ)

How do I update the firmware for Cubroid Manager?

To update the firmware, turn on one block at a time, go to the 'Firmware Update' button, and do not turn off the block or the Manager app during the update process. The LED light on the block will turn on and off, and when the update is complete, the block will briefly disconnect and reconnect.

Do I need to set a group number for Cubroid Manager?

If you are using only 1 set of coding blocks, you can leave the group number at the default value, 0. However, if you are using more than 1 set of coding blocks, you need to set a group number ranging from 0001 to 9999. When using the Coding Cubroid 2 or Coding Cubroid 3 app, make sure to enter the same group number as your coding blocks for a successful Bluetooth connection.