SharePa by Idemia

About SharePa by Idemia

The prime purpose of the application is to provide step by step user Guide for product configuration.

Step-1:Go through the “Opening of Box” process Go through the Opening of Box process

Step-2: Wire connection Wire Connection Diagram of Wieg and Out . Stand-alone door controller connection.

Step-3 IP address You need to assign IP addresses in device to communicate with the Software.

IP Configuration through Pen Drive and OTG Cable (If you do not know Default IP address of the device).

IP Configuration through MBTB (If you know Default IP address of the device)

IP Configuration through Webpage (If you know Default IP address of the device).

Step-4: Software installation

To download Morpho Manager software http://www.morphomanager.net

First check system requirements before initiating the installation process.
Install Morpho Manager Server.

Install Morpho Manager Client.

Step-5: Configuration of devices with Morpho Manager
Morpho Manager Express Configuration (For Basic Configuration).
Advance Morpho Manager Configuration (You need to provide information about the configuration, which you want to configure).
IDEMIA will not be responsible for any physical damage or burn issue so please go through the document.
Please share your feedback to improve our services.

Note: This application will use only with IDEMIA access control devices with Morpho Manager access control software