Carbon Monoxide detector

About Carbon Monoxide detector

A carbon monoxide detector or CO detector is a device that detects the presence of the carbon monoxide (CO) gas to prevent carbon monoxide poisoooning. In the late 1990s Underwriters Laboratories changed the definition of a single station CO detector with a sound device to carbon monoxide (CO) alarm. This applies to all CO safety alarms that meet UL 2034 standard;however for passive indicators and system devices that meet UL 2075, UL refers to these as carbon monoxide detectors. Most CO detectors use a sensor with a defined, limited lifespan, and will not work indefinitely.
This appis a simulator of carbon monoxide tracker gaz leak detector thatwill help you monitor your MQ2 gas sensor by Bt. This is a simple app that uses an CO2 gas sensor to monitor and analyze smoke or gas levels around you on screen.
The app contains a scanner. The analog output pin of the co2 sensor is connected to the analog pin ;it is very friendly and helpful you can use it without Bluetooth. you just shoose the method you want to scan with either camera with filter o radar scanner the start moving while you are using this device traacker app.
The CO detector app sensor normally produces a value between 400 and 300 in clean air. When The smoke detector or combustible gas is detected in its surroundings yard, the sensor produces readings above 700. You can Stop thr radar and see the instant scanner result ; the app can be useful without internet to measure smoke dencity in the air also using camera topicture the gaz leak detector in dark mode .
Disclaimer
please notice that this app is a simulator it does not guarantie you 100 percent effeciency it is only made for siimulation and education purpose ? thank you for downloading this carbon detector app .